Cell Phone User's Guide

102

Screen saver

A digital clock screen saver is used for power saving in standby mode. It is

activated when no function of the phone has been used for a certain time while

the phone’s flip is closed. Press any key to deactivate the screen saver or open the

flip. The screen saver is also deactivated when the phone is out of the network

coverage area.

Press Menu and select Settings, Display settings and Screen saver timeout. Select

the timeout after which the screen saver will be activated. The length of the

timeout can vary from 5 seconds to 60 minutes.

Note that the screen saver overrides all graphics and texts on the display in

standby mode.

Display brightness

You can change the brightness level of the phone display.

Press Menu and select Settings, Display settings and Display brightness. Move the

joystick to the left to decrease and to the right to increase the brightness level,

and press OK to accept it.

Tone settings

Press Menu and select Settings and Tone settings. You can find the same settings

in the Profiles menu, see Profiles (Menu 3) on page 93. Note that the settings you

make, will change the settings in the active profile.

Select Incoming call alert to choose how the phone notifies you of an incoming

voice call. The options are Ringing, Ascending, Ring once, Beep once and Off.