User's Manual

Using the LMF – continued

FEB 2005 1X SC 4812T Lite BTS Optimization/ATP 3-29

PRELIMINARY

Prerequisites

Before attempting to log into a BTS, ensure that the following tasks have

been completed:

S The LMF Program is correctly installed on the LMF Computer.

S A bts-nnn Folder with the correct CDF/NECF and CBSC Files is

present.

S The LMF Computer was connected to the BTS before starting the

Windows Operating System and the LMF Software. If necessary,

restart the computer after connecting it to the BTS in accordance with

Table 3-6 and Figure 3-3.

Ensure that the correct bts–#.cdf/necf and cbsc–#.CDF

Files are used for the BTS. These should be the

CDF/NECF Files that are provided for the BTS by the

CBSC.

Failure to use the correct CDF/NECF Files can result in

invalid Optimization.

Failure to use the correct CDF/NECF Files to log into

a live (traffic–carrying) site can shut down the site.

CAUTION

BTS Login from the GUI Environment

Perform the procedure in Table 3-10 to log into a BTS when using the

GUI Environment.

Table 3-10: BTS GUI Login Procedure

n Step Action

1 Start the LMF GUI Environment by double–clicking on the WinLMF Desktop Icon (if the LMF is

not running).

– An LMF Window will open and display the LMF Build Number in the Title Bar.

2 If a warning similar to the following is displayed, proceed to Step 3.

The CLI Handler is already running.

This may cause conflicts with the LMF.

Are you sure you want to start the application?

Yes No

table continued on next page