User Manual

RFDS Setup and Calibration – continued
Jan 2002
3-107
SC4812ET BTS Optimization/ATP — CDMA LMF
Program TSU NAM
The NAM must be programmed before it can receive and process test
calls, or be used for any type of RFDS test.
Prerequisites
 MGLI is INS_ACT (bright green).
 SUA is powered up and has a code load.
Follow the procedure in Table 3-53 to program the TSU NAM.
Table 3-53: Program NAM Procedure
Step Action
1 In the LMF, select the RFDS tab.
2 Select the SUA by clicking on it.
3 Click on TSU in the BTS menu bar, and select Program TSU NAM from the pull–down menu.
– A NAM programming window will appear.
4 Enter the appropriate information in the boxes (see Table 3-47 and Table 3-48) .
5 Click on the OK button to display the status report.
6 Click on the OK button to close the status report window.
3