User Manual

Test Equipment Set–up – continued

SC4812ET BTS Optimization/ATP — CDMA LMF

Jan 2002

3-56

IS–95 A/B Testing

Optimization and ATP testing for IS–95A/B sites or carriers may be

performed using one of the following test equipment:

 CyberTest

 Advantest R3267 spectrum analyzer with R3562 signal generator and

HP–437B or Gigatronics Power Meter

 Agilent E4406A transmitter test set with E4432B signal generator

 Agilent 8935 series E6380A communications test set (formerly HP

8935)

 Hewlett–Packard HP 8921 (with CDMA interface for 1.9 GHz PCS

Interface) and HP–437B or Gigatronics Power Meter

 Spectrum Analyzer (HP8594E) – optional

 Rubidium Standard Timebase – optional

CDMA2000 1X Operation

Optimization and ATP testing for CDMA2000 1X sites or carriers may

be performed using the following test equipment:

 Advantest R3267 spectrum analyzer with R3562 signal generator

 Agilent E4406A transmitter test set with E4432B signal generator

 Agilent 8935 series E6380A communications test set (formerly HP

8935) with option 200 or R2K and with E4432B signal generator for

1X FER

Test Equipment Preparation

See Appendix I for specific steps to prepare each type of test set and

power meter to perform calibration and ATP .