Instructions / Assembly

Each carton contains one Top Tree Section(A) and one Metal Tree Base(B).
Install the Metal Tree Base(B) at the bottom of the Top Tree Section(A) by
inserting the threaded stem into the threaded mounting postion on theTop
Tree Section(A).
Tighten by turning the Top Tree Section(A) clockwise.
WARNING: Using excessive force to assemble the base may cause
breakage.
Shaping Instructions
Shaping the Tree Branches is the last step of assembly. The care and
attention given to this final process will result in a genuinely beautiful and
appealing holiday centerpiece.
1.Every tree style is shipped from the factory with the branches compressed
against the trunk(Figure 1).
2.Each Branch tip must be shaped to its proper position to give the tree a
natural look. This is done by gently lowering the branches into a proper
position and spreading them out away from the centre trunk(Figure 2).
3.Each individual tip should then be spread out separately. Fold out and
position the branches for your intended look (Figure 3).
WARNING: Branches are fragile and should be lightly bent whilst supported
at the base of the branch.
Assembly Steps
Fig.3
Fig.2
Fig.1
Noble house Home Furnishings LLC
Page 2 OF 3