CAUTION: You must read this before you proceed. LANTERN CAUTION : This Lantern is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Lantern and to prevent damage to the Lantern, 02 persons may be needed to execute this action.
Description Qty A Top Panel 1 B Side Support Bar 2 C Side Panel 2 D First Leg Panel 1 E Second Leg Panel 1 F Candle Tray 1 G Base 1 H Glass 2 Description Qty ① Screws (M6x60mm) 13 ② Allen Key 1 No. No.
Before Beginning Assembly: Top Panel (A) OVERVIEW Side Support Bar(B) Glass (H) Candle Tray(F) Side Panel(C) First Leg Panel(D) Second Leg Panel(E) Base (G) FRONT FACING This Lantern has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Lantern parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Step 2 With the help of your adult partner, Position the support bar of Candle Tray (F) and Base(G) to the housing of Side Panels (C) as shown in picture above. Step 3 With the help of your adult partner, align the First Leg Panel (D) to Base (G) and Candle Tray (F),secure by using Screws (①) and Allen Key (②) as shown above Then, affix Side Support Bar (B) to First Leg Panel (D), secure by using Screws (①) and Allen Key (②) as shown above DO NOT FULLY TIGHTHEN SCREWS.
Step 4 With the help of your adult partner, turn the pre-assembled on step 3 up side down Position the Glass (H) into the rail of the First Leg Panel (D) and Support Bar (B). Step 5 With the help of your adult partner, attach the Second Leg Panel (E ) to the pre-assembled on step 4, secure by using Screws (①) and Allen Key (②) as shown above DO NOT FULLY TIGHTHEN SCREWS.
Step 6 Attach the hook of Top Panel (A) to the pre-assembled on step 5 as shown above. Step 7 Lock the Top (A) to the Lantern as shown above.
Step 8 Adjust Pre-installed Levellers height for balance Inspect the Lantern and make sure all parts are adequately connected. In a sequential manner, tighten all Screws at all joints. With assistance from your adult partners, adjust the Levellers to desired height to avoid wobbles. Step 9 Inspect it and make sure all parts are adequately connected. Ensure all screws, bolts are fully locked into position and secured. This Lantern can only be used on a flat, level surface. The Lantern is ready to be used.
