Assembly Instructions Caution: You must read this before you proceed Power Reclining Chair Parts List Label Picture Description QTY A Chair Base with Footrest 1 B Chair Backrest 1 Noble house Home Furnishings LLC Page 1 OF 11
C Left Wing (Labelled C) 1 D Right Wing (Labelled D) 1 Description QTY Power Line with Transformer 1 Hardware Label Picture ① Assembly Preparation Befor Begining Assembly: Noble house Home Furnishings LLC Page 2 OF 11
Assembly Steps Overview Chair Backrest (B) Right Wing (D) Left Wing (C) Chair Base with Footrest (A) Power Line with Transformer (① ) FRONT FACING This Power Recliner Chair has multiple parts and may require about 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Take out the small carton box from the back of Chair Base with Footrest(A) containing the Power Line with Transformer(①). Step 3 A C D Take out the 2 non-woven bags with the Left Wing(C) and Right Wing(D) from the bottom of Chair Base with Footrest(A).
Step 4 B A With assistance from your adult partner, hold up the Chair Backrest(B) while standing behind the Chair Base with Footrest(A). Insert the small metal arms on the sides of the Chair Backrest(B) into the prefabricated slide lock gadget on the Chair Base with Footrest(A) as shown above. Firmly but gently, push the Chair Backrest(B) downwards until the Backrest is fully slotted and locked into position.
Step 6 Velcro Smooth down the fabric flap on the Chair Backrest(B). Run your hands down both sides of the flap, from top to bottom, allowing the velcro tape to adhere to the flap under the seat of the Chair. Step 7 B D A ① ① Locate the power interface line at the bottom of Chair Base with Footrest(A). Connect the power interface and Power Line with Transformer(①), then fasten the buckle as pictured above.
Step 8 Make sure all parts are connected and securely locked into position. Your Power Recliner Chair is ready for use. This Power Recliner Chair can only be used on a flat, level surface.
To Disassemble Recliner Step 9 Push up on the Right Wing(D) and Left Wing(C) one by one until removed from the Chair Backrest(B). Step 10 To Disassemble Recliner: Open the flap on the Backrest(B), use a screwdriver (Don't use your fingers) pressing outward on the metal ear on the preattached Metal Bracket on one side of the Chair Base(A). With assistance of your adult partner to keep the Chair Base(A) in place, pull the Backrest(B) upward at the same time, repeat the same step for another side.
Step 11 B A ① ① Open buckle, then pull apart power interface from Power Line with Transformer(①). Warning Do not allow children to play on the Recliner. Always leave the Recliner in an upright and closed position after use. Keep hands and feet clear of the footrest mechanism and any gaps. Don't sit any armrest of Recliner.
User Instructions Power Recliner Chair To get into the Recline position: Sit into the seat. Press the Front button on the switch on the outside of right armrest. The Power Recliner Chair will smoothly decend into a fully reclined position. Press the Front button to Open USB Charger Switch To move the Chair back into the Upright Position: Press the Hind button on the switch on the outside of right armrest. The Power Recliner Chair will smoothly ascend until fully into an upright position.
Noble house Home Furnishings LLC Page 11 OF 11
