Use and Care Manual

Step 2
Put the Top Panel(I) with its face down onto a soft and clean surface, turn the body base upside down and place it
onto the Top Panel(I).
Attach the Top Panel(I) with Washer(③), Spring Washer(④) and Bolt(②) by using the the Allen Key(⑤) to make a
whole body.
Do not fully tighten the bolts.
Step 3
Tighten all Bolts completely, put the Plastic Cap(①) to cover the Bolt heads.
Adjust the Leveler to ensure good stability.
Step 4
Your table is ready for use.
This Table can only be used on a flat, level surface.
Noble House Home Furnishings LLC
Page 4 OF 5