Assembly Instructions Caution : You must read this before you proceed. CHAIR CAUTION : This bench is NOT a TOY. Keep your child / children at bay in the process of assembly.
No. Description Qty A Backrest Panel 1 B Chair Seat Panel 1 C Left Armrest 1 D Right Armrest 1 E Back Cushion 1 F Seat Cushion 1 Description Qty Bolts (M8*30mm ) 11 No.
② Washers ( 8mm ) 11 ③ Spring Washers ( 8mm ) 11 ④ Nuts ( 8mm ) 7 ⑤ Spanner 2 Before Beginning Assembly: Overview E(Back Cushion) A(Backrest Panel) D(Right Armrest) C(Left Armrest) B(Chair Seat Panel ) F(Seat Cushion) FRONT FACING Noble house Home Furnishings LLC 3 OF 7
This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean soft surface. Step 2 D ⑤ ① ④③ ② B Place the Right Armrest(D) to the mounting position on the Chair Seat Panel(B).
Step 3 D C B Attaching the Left Armrest(C) to the Chair Seat Panel(B) repeat the same steps. DO NOT over tighten. Step 4 A ②③ ① ⑤ D C Attach the Backrest Panel(A) to the Left Armrest(C) and Right Armrest(D) using Bolts(①),Washer(②),Spring Washer(③) with the Spanner(⑤). DO NOT over tighten.
Turn the Chair right side up. Place the Seat Cushion(F) on the Seat. Tie up the strips to the Chair as shown. Step 6 E Place the Back Cushion(E) on the Chair. Tie up the ropes to the Chair as shown. Step 7 Tighten all Bolts at all joints. Adjust the Legs with pre-installed Levellers until the Chair is level with the ground. Your Chair is ready for use. Caution: This Chair can only be used on a flat, level surface.
Noble house Home Furnishings LLC 7 OF 7
Assembly Instructions Caution : You must read this before you proceed. Loveseat CAUTION : This bench is NOT a TOY. Keep your child / children at bay in the process of assembly. No.
B Chair Seat Panel 1 C Left Armrest 1 D Right Armrest 1 E Back Cushion 2 F Seat Cushion 2 Description Qty ① Bolts(M8*25mm） 3 ② Bolts (M8*30mm ) 11 ③ Washers ( 8mm ) 13 ④ Spring Washers ( 8mm ) 13 ⑤ Nuts ( 8mm ) 7 ⑥ Spanner 2 No.
Before Beginning Assembly: A(Backrest Panel) E(Back Cushion) F(Seat Cushion) D(Right Armrest) C(Left Armrest) B(Chair Seat Panel) FRONT FACING This Loveseat has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Loveseat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean soft surface. Step 2 ⑥ D ② ⑤④③ B Place the Right Armrest(D) to the mounting position on the Chair Seat Panel(B). Attach the Right Armrest(D) to the Chair Seat Panel(B) using Bolts(②),Washer(③),Spring Washer(④) and Nut(⑤) with the Spanner(⑥). DO NOT over tighten.
Attaching the Left Armrest(C) to the Chair Seat Panel(B) repeat the same steps. DO NOT over tighten. Step 4 A ⑥ ③ ④ ② C D B Attach the Backrest Panel(A) to the Left Armrest(C) and Right Armrest(D) using Bolts(②),Washer(③),Spring Washer(④) with the Spanner(⑥). DO NOT over tighten. Step 5 C B D ① ⑥ ④ ③ A Turn the Loveseat upside down on to a soft surface as shown. Attach the Backrest Panel (A) to the Chair Seat Panel (B) using Bolts(①),Washer(③),Spring Washer(④) with the Spanner(⑥).
Step 6 F Turn the Loveseat right side up. Place the Seat Cushion(F) on the Seat. Tie up the strips to the Loveseat as shown. Step 7 E Place the Back Cushion(E) on the Chair. Tie up the ropes to the Loveseat as shown.
Step 8 Tighten all Bolts at all joints. Adjust the Legs with pre-installed Levellers until the Loveseat is level with the ground. Your Loveseat is ready for use. Caution: This Loveseat can only be used on a flat, level surface.
Noble house Home Furnishings LLC 8 OF 8
