Use and Care Manual

Step 1
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Right Panel(D) with its inside facing up .
Attach Seat(G) to Right Panel(D) using Bolt(②) and Washer(③) with Allen Key(④) as shown above.
Only loosely tighten Bolts.
ATTENTION: There may be some PE wicker that may have covered the Mounting Points. To ease
assembly, guide and slide the PE wicker away from these Mounting Points.
DO NOT CUT AWAY ANY PE WICKER as this would cause the wicker to unravel!
Attach Backrest(H) to Seat(G) using Bolt(②) and Washer(③) with Allen Key(④) as shown above.
Only loosely tighten Bolts.
Step 2
Noble house Home Furnishings LLC
4 OF 7