Use and Care Manual

Step 6
Step 5
Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and gracefully, sit into to the Chair.
This would help to align all the parts at all the joint areas.
Then carefully get off the Chair, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there is still wobbles, loosen the Bolts and execute this same process.
If the Chair is not stable it could lead to damage to the product.
Note: This step is done better with the assistance of a second adult.
Use the Bolt Caps(①) to cover all Bolts.
Step 7
Place the Seat Cushion(E) and Back Cushion(F) onto the Left Armchair as shown.
Your Left Armchair is ready for use.
This Left Armchair can only be used on a flat, level surface.
Noble house Home Furnishings LLC
6 OF 7