Instructions / Assembly

Step 3
Step 4
With assistance from your adult partner, hold up the fully assembled
Backrest(A) , stand behind the Chair.
Insert the pre-attached Metal Bracket on the sides of the Chair
Backrest(B) into the pre-attached slide lock gadget on the Chair Base(B)
as shown above.
Firmly but gently, push the Chair Backrest(A) downwards until the
Backrest(A) is fully slotted and locked into position.
Smooth down the fabric flap on the Chair Backrest.
Run your hands down both sides of the flap, from top to bottom, allowing
the velcro tape to adhere to the flap under the seat of the chair.
Your Recliner is ready for use.
Chair Base Body(B)
Chair Backrest
(
A
)
Page 4 OF 7