WARNING!! Children have died from furniture tipover. Tip restraints have been included with this product; you must install the tip restraints according to these instructions in order to minimize the risk of furniture tipping. If you have any questions about this product or the tip restraint, please send us an email at tip_restraint_help@Noblehousefurniture.com NEVER allow children to climb or hang on furniture, including drawers or cabinet doors.
Caution : You must read this before you proceed OFFICE DESK Description QTY AL Drawer Left Side Rail 1 AR Drawer Right Side Rail 1 BL Drawer Left Bottom Rail 1 BR Drawer Right Bottom Rail 1 C Top Tray Panel 1 D Left Side Panel 1 E Right Side Panel 1 Label Noble House Home Furnishings LLC Picture Page 2 OF 19
F Top Panel 1 G Bottom Panel (with prefixed Apron) 1 H Center Panel 1 I Back Panel 1 J Drawer Front Panel 1 K Drawer Back Panel 1 L Drawer Side Panel 2 M Drawer Bottom Panel 1 N Drawer Bone 1 O Leg (with pre-fixed PVC Foot) 4 P Steel Handle 1 Q O-Ring 2 Noble House Home Furnishings LLC Page 3 OF 19
Description QTY ① Cam Lock 21 ② Cam Bolt 21 ③ Cam Cap 21 ④ Positioning Dowel (φ8*30mm) 13 ⑤ Cap Wood Screw (M6*50mm) 3 ⑥ Screw (M3.
Cabinet Restraint Device Hardware ⑮ Metal Bracket 4 ⑯ Wall Plug 2 ⑰ Wall Plug Screw 2 ⑱ Pan Head Screw 2 ⑲ Cabinet Restraint Strap 2 Before Beginning Assembly: X 21 X 13 X 21 X 21 X3 X 15 X9 X9 X1 X9 X9 X1 X1 X2 X2 Noble House Home Furnishings LLC X1 X1 X1 X1 X1 Page 5 OF 19
Overview O-Ring (Q) Top Tray Panel (C) Back Panel (I) Center Panel (H) Right Side Panel (E) Left Side Panel (D) Top Panel (F) Drawer Front Panel (J) Bottom Panel (G) Steel Handle (P) Leg (O) FRONT This Office Desk has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Office Desk parts, the above picture is to help you put the various parts into perspective.
Step 2 ⑫ ② D Attach Cam Bolts(②) to mounting positions on Left Side Panel(D) with Screwdriver(⑫). Step 3 3.1 ⑫ AL 3.1 3.2 ⑥ AL ⑥ AL ⑥ ⑫ AL ⑥ ⑥ ⑥ D 3.1) Attach Drawer Left Side Rail(AL) to Left Side Panel(D) using Screws(⑥) with Screwdriver(⑫) where indicated. 3.2) Attach Drawer Left Side Rail(AL) to Left Side Panel(D) using Screw(⑥) with Screwdriver(⑫) where indicated. Note: There are pre-existing mounting positions on the Left Side Panel(D) to attach the Drawer Left Side Rail(AL).
Step 5 5.1 5.2 ⑥ ⑫ ⑥ AR AR ⑥ ⑫ ⑥ E 5.1 AR ⑥ AR ⑥ 5.1) Attach Drawer Right Side Rail(AR) to Right Side Panel(E) using Screws(⑥) with Screwdriver(⑫) where indicated. 5.2) Attach Drawer Right Side Rail(AR) to Right Side Panel(E) using Screw(⑥) with Screwdriver(⑫) where indicated. Note: There are pre-existing mounting positions on the Right Side Panel(E) to attach the Drawer Right Side Rail(AR). Tighten the Screws fully in a sequential manner. Step 6 6.1 6.2 ① ① ④ ① ① ④ F ④ ④ ① ④ 6.
Step 7 7.2 7.1 ① ① ④ ④ ① G ① ④ ④ ① ④ 7.1) Insert Cam Locks(①) into mounting positions on Bottom Panel(G) by hand. 7.2) Insert Positioning Dowels(④) into mounting positions on Bottom Panel(G) by hand. Step 8 ① ① ① H Insert Cam Locks(①) into mounting positions on Center Panel(H) by hand. Step 9 9.3 9.2 9.1 Q ① ④ Q ④ ④ 9.4 ① ① ① I ① ④ ④ Q Q I 9.1) Insert Cam Locks(①) into mounting positions on Back Panel(I) by hand. 9.
Step 10 ① N ① ① N Insert Cam Locks(①) into mounting positions on Drawer Bone(N) by hand. Step 11 ② ① 11.1 ⑫ Arrow ① H 11.2 C NOTE ① ④ ② Cam Bolt Mounting Position Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 11.1) Insert the Cam Bolts(②) on Top Panel(C) into mounting positions on side of Center Panel(H). 11.2) Turn the Cam Locks(①) clockwise with the Screwdriver(⑫) until they all lock into place.
Step 13 C 13.2 13.1 ④ ④ F ② Arrow ① 13.3 NOTE ① ① D ⑫ ④ ② Cam Bolt Mounting Position 13.1) Insert Positioning Dowels(④) from Top Panel(F) into mounting positions on Left Side Panel(D). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 13.2) Insert the Cam Bolts(②) on Left Side Panel(D) into mounting positions on Top Tray Panel(C) and Top Panel(F). 13.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑫) until they all lock into place.
Step 15 C 15.1 15.2 ④ ④ F G ② Arrow ① 15.3 NOTE ① ① Cam Bolt Mounting Position ⑫ D ④ ② 15.1) Insert Positioning Dowels(④) from Bottom Panel(G) into mounting positions on Left Side Panel(D). Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. 15.2) Insert the Cam Bolts(②) on Left Side Panel(D) into mounting positions on Bottom Panel(G). 15.3) Turn the Cam Locks(①) clockwise with the Screwdriver(⑫) until they all lock into place.
Step 17 O ⑧ G ⑪ ⑨ ⑩ N Attach Legs(O) to apron on Bottom Panel(G) using Screws(⑧), Spring Washers(⑨) and Washers(⑩) with Allen Key(⑪). Tighten the Screws fully in a sequential manner. Step 18 18.2 18.1 ⑫ N J N ② ③ J ① K Note: Ensure the arrows on Cam Locks head points towards the Cam Bolt mounting positions. Insert the Cam Bolts(②) on Drawer Front(J) and Drawer Back Panel(K) into mounting positions on Drawer Bone(N). 18.
Step 19 ⑦ ⑦ ⑦ ⑦ ⑦ L J N ⑫ K ⑦ Attach Drawer Side Panels(L) to Drawer Front Panel(J) and Drawer Back Panel(K) using Screws(⑦) with Screwdriver(⑫). Tighten the Screws fully in a sequential manner. Step 20 J ⑦ L M ⑦ ⑦ ⑦ K L ⑫ ⑦ ⑦ Attach Drawer Bottom Panel(M) to Drawer Assembly,attach Drawer Side Panels(K) to Drawer Front Panel(J) and Drawer Back Panel(L) using Screws(⑦) with Screwdriver(⑫). Tighten the Screws fully in a sequential manner. Step 21 21.2 ⑫ ⑥ 21.
Step 22 ⑥ P J ⑥ ⑫ Attach Steel Handle(P) to Drawer Front Panel(J) using Screws(⑥) with Screwdriver(⑫). Tighten the Screws fully in a sequential manner. Step 23 ① ③ Attach Cam Caps(③) to all Cam Locks(①) by hand. Step 24 AL/AR BL/BR Put Drawer Assembly in place by aligning the rails.
! WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Cabinet Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage For Cabinet Restraint Device: To Secure Office Desk against wall, attach Metal Brackets(⑮) to wall and product, and use Cabinet Restraint Straps(⑲) to connect the Metal Brackets(⑮).
Step 26 ⑯ 26.1 ⑭ ⑯ ⑬ ⑯ 26.2 26.1) Drill two holes on wall at same height as Metal Brackets(⑮) with Power Drill(⑭). You can mark these points in two ways as below: 1) Move the Office Desk back to the wall. Mark two points same height as Office Desk on the wall. Note: The Metal Brackets need to be secured to solid, load bearing surface. Please use a Stud Finder(not supplied) if needed to locate the Wall Frame.
Step 28 ⑲ ⑲ ⑲ ⑮ ⑮ Move the Office Desk back against wall. Pull the Restraint Straps(⑲) through the Metal Brackets(⑮) on the wall and Bookcase one by one, and pull the Restraint Straps(⑲) tight. Step 29 Your Office Desk is ready for use. This Office Desk can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 19 OF 19