Instructions / Assembly

Place the Storage Ottoman right side up, test for eveness.
Where you find this Storage Ottoman being uneven, identify the
corresponding leg and "add or remove" a Washer Ring to achieve
evenness.
Turn the Ottoman the right side up and it is ready for use.
This Ottoman can only be used on a flat, level surface.
Install the first leg(B) into the bottom of the Storage Ottoman(A) by
placing 1 (ONE) piece of Washer Ring on the threaded stem.
The use of Washer Rings (①) improves tightness and security of leg
after assembly.
Tighten by turning the leg clockwise.
Repeat the same step to install the three remaining legs.
Note : The use of Washer Rings are OPTIONAL and is especially
useful to help alleviate slight wobbleness . Some Legs may need
more than one whilst some legs do not need any.
Step 2
Step 3
Wood leg (B)
Washer Ring (①)
Ottoman (A)
4 OF 5