Assembly Instructions Caution : You must read this before you proceed Please look in the magic tape for hardware packs and legs.
Parts List Label Description QTY A Top Panel 1 B Left Side Panel 1 C Right Side Panel 1 D Middle Panel 1 E Movable Panel 1 F Bottom Panel 1 G Vertical Panel 2 H Back Panel 1 I Back Panel 1 J Door Panel 1 K Connect Bar 1 Noble House Home Furnishing LLC Picture page 2 of 12
Hardware Label 1 2 Picture Description Cam Bolt Dowel QTY 7 25 3 Cam Nut 4 Screw (M3x10mm) 5 Magnetic Bar 1 6 Hinge 2 7 Knob Bolt 1 8 Knob 1 9 Magnet 1 10 Self Pin 4 Screw 3 12 Wall Anchor Screw 2 13 Screw 3 Screwdriver 1 11 14 Noble House Home Furnishing LLC (M4x14mm) (M3.
Assembly Steps Overview Top Panel(A) Connect Bar(K) Right Side Panel(C) Left Side Panel(B) Back Panel(I) Movable Panel(E) Door Panel(J) Middle Panel(D) Back Panel(H) Vertical Panel(G) Bottom Panel(F) This Cabinet has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Cabinet parts, the above picture is to help you put the various parts into perspective.
Assembly Preparation Before Beginning Assembly: x2 x7 x25 x7 x11 x1 x1 x4 x3 Noble House Home Furnishing LLC x1 x2 x2 x1 x3 page 4 of 12
Step 1 x2 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 1 x6 4 x6 5 x1 6 x2 7 x1 8 x1 9 x1 13 Top Panel(A) 9 2.2 x2 Left Side Panel(B) 1 13 1 1 2.3 Right Side Panel(C) 2.4 1 4 6 2.5 Bottom Panel(F) 1 Door Panel(J) 4 1 4 5 8 7 6 2.1) Insert Cam Bolt (①) into the mounting positions on Top Panel (A) using Screwdriver( 14 ). . Attach Magnet( 9 )to the Top Panel (A) with Screw (13 ) using Screwdriver（14 ）. 2.
Step 3 2 x8 3 x2 Right Side Panel(C) Connect Bar(K) 2 2 2 2 Left Side Panel(B) Middle Panel(D) 2 2 2 2 3 3 Attach Left Side Panel (B) to the Middle Panel (D) and Connect Bar (K) with Dowel (②), then insert Cam Nut (③) into Middle Panel (D) using Screwdriver（14 ).
Step 5 2 x4 Left Side Panel(B) 2 2 Vertical Panel(G) 2 2 Right Side Panel(C) Middle Panel(D) Attach Vertical Panel (G) to the Middle Panel (D) with Dowel (②).
Step 7 Back Panel(I) Right Side Panel(C) Left Side Panel(B) Bottom Panel(F) Position the Bottom Panel (F) bottom up Insert Back Panel (I) into groove of Left Side Panel (B) and Right Side Panel (C).
Step 9 Door Panel(J) 4 Left Side Panel(B) 4 10 10 10 10 4 4 Movable Panel(E) Right Side Panel(C) 4 x4 10 x4 Attach Door Panel ( J) to Right Side Panel (C) by attaching the other side of Hinge(⑥) to Right Side Panel (C) with Screw（④ ）using Screwdriver( ⑭ ),turning clockwise until tight. Inset Self Pin (⑩) into Left Side Panel (B) and Right Side Panel (C), then put Movable Panel (E) on the Self Pin (⑩).
Step 11 Your Cabinet is ready for use Noble House Home Furnishing LLC page 11 of 12
Noble House Home Furnishing LLC page 12 of 12
