Assembly Instructions Caution: You should read this carefully before you proceed Sofa Noble House Home Furnishings LLC Page 1 OF 11
Parts List Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat cushion 3 E Seat Board 1 F Frontal Seat Board 1 G Sofa Leg 4 H Middle Support Leg 1 Noble House Home Furnishings LLC Page 2 OF 11
Hardware Label Picture Description QTY ① Bolt (M8*30MM) 9 (8pcs already fixed with Backrest & Armrest) ② Gasket 8 ③ Allen wrench(M8) 1 ④ Bolt (M8*60MM) 3 ⑤ Washer(M8) 3 ⑥ Spring Washer(M8) 3 Assembly Preparation Before Beginning Assembly: X9 X8 X3 X3 X3 Noble House Home Furnishings LLC Page 3 OF 11
Assembly Steps Overview Backrest (A) Left Armrest (B) Sofa Leg (G) Frontal Seat Board(F) Middle Support Leg(H) Right Armrest (C) Seat Cushion (D) FRONT FACING This Sofa has multiple parts and may require up to 60 minutes to assemble. To give you an overview of the Sofa parts, the above picture is provided to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Backrest (A) Right Armrest (C) Left Armrest (B) Tapered Connectors on Backrest Tapered Connectors on Armrest 1.1 1.2 Open the carton and place all the parts on a clean, non-marring surface. With the assistance from your adult partner: 1.1)Lift the Backrest(A) up, make sure the Backrest(A) is vertical and aligned to the Armrests. Align the Tapered Connectors on the Backrest(A) with those on the Armrest(B&C).
Step 2 Right Armrest (C) Left Armrest (B) ① ③ Frontal Seat Board(F) Using the Allen Wrench (③) and turning Counter-Clockwise, loosen all the Bolts (①) which are preassembled on the Backrest (A) and Armrests (B&C) about 3 threads out to make a small gap in which to fit the metal brackets. Place the Frontal Seat Board (F) as shown in the above pictures in front of the semi-sofa from step 1, hang the Brackets on the Bolts found on the Armrests (B&C).
Step 3 Right Armrest (B) Backrest (A) Right Armrest (C) ① Seat Board(E) ③ Pull on the hand traps and put the Seat Board (E) onto the semi-assembled sofa of step 2 as shown in the above pictures. Insert the brackets on the board onto the Bolts. Then use the Allen Wrench (③) and turn Clockwise to tighten the Bolts, ensure the brackets are tightly fitted onto the Bolts.
Step 4 Left Armrest (B) Right Armrest (C) Tilt and lay the sofa on its Backrest(A) onto a flat surface. Fix the Backrest(A) with Armrests (B&C) using Bolts(④), Spring Washers(⑥), and Washers(⑤) with the Allen wrench(③) as pictured above. Tighten the Bolts fully in a sequential manner.
Step 5 Use Gaskets (②) to achieve stability Gasket(②) Sofa Leg (G) Middle Support Leg(H) Sofa Leg (G) Attach the sofa Leg(G) to the bottom of the sofa by placing one Gasket(②) on the threaded stem. Then insert the threaded stem into the threaded mounting postion at the corner of the sofa. Tighten by turning the Leg clockwise. Repeat the same step to install the remaining four Legs. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles.
Step 5 Seat Cushion (D) Place the sofa in an upright position, then Place the Seat Cushions(D) onto the Sofa. Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Noble House Home Furnishings LLC Page 11 OF 11