Instructions / Assembly

Step 1
Step 2
Unpack and place all parts on a clean, non-marring surface.
2.1: Place the Back Rest (A) as shown above. Attach Box Seat (C) to Back
Rest (A) using Bolt (②) , Spring Washer (⑤) and Washer (⑥) with Allen
Wrench (①).
2.2: Then fix the Seat Frame (C) and Back Rest(A) with Bolt (④), Spring
Washer (⑤) and Washer (⑥) using Allen Wrench (①).
2.3: Align the tenon of Left Side Strecher (F) and Right Side Stretcher (G)
with the mount position of Back Rest (A). Then, fix the Stretcher using Screw
(⑧) with Screwdriver (Not Provided).
Do not fully tighten the Bolts.
Page 5 OF 9