Specification

ManualsBrandsNo Drilling Required ManualsBath30 in. x 1-1/2 in. Grab Bar in Polished Stainless Steel

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction GuideGRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide

GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide

GB3200 (1

GB3200 (1GB3200 (1

GB3200 (1-

-1/4” diameter) and GB3800 Series (1

1/4” diameter) and GB3800 Series (11/4” diameter) and GB3800 Series (1

1/4” diameter) and GB3800 Series (1-

-1/2” diamet

1/2” diamet1/2” diamet

1/2” diameter)

er) er)

er)

Thank you for purchasing the

nie wieder bohren

(German for “no drilling required”) heavy duty grab bars.

nie wieder bohren

Germany is an innovation leader in fastening technology. These bars have been engineered to exceed ASTM (American Society for

Testing and Materials) requirements and offer the ability to mount using the internationally patented

nie wieder bohren

- no

drilling required -technology on premium surfaces such as tile, stone, glass and metal. The

nie wieder bohren

– no drilling

required -adapter system allows for ease of installation, durability, performance and no holes in the walls! Another advantage of

this innovative approach on fastening technology is that the system can be removed, if needed, with no damage to the surface.

Moreover, with an additional set of adapters, the bar can be re-installed in minutes anywhere you like as long as the surface is

suitable for the

nie wieder bohren

– no drilling required -system.

Choosing and Positioning a Wall Mounted Grab Bar

Choosing and Positioning a Wall Mounted Grab BarChoosing and Positioning a Wall Mounted Grab Bar

Choosing and Positioning a Wall Mounted Grab Bar

Wall mounted grab bars come in several lengths. Deciding which length to install depends on how the grab bar will be used. If you

are planning to put a main grab bar on the side wall of a bathroom tub enclosure, the National Kitchen and Bath Association

recommends using a grab bar of at least 24 inches. If you also want to add a second grab bar for further support on the shower

head wall, it should be at least 12 inches long. Before deciding whether to install a grab bar horizontally, diagonally or vertically

the following needs to be taken into consideration: Horizontal grab bars offer better leverage to a person getting up from the

bathtub or up and down from a toilet, whereas a grab bar placed at a 45 degree angle to the toilet or bathtub rim is easier for

people of differing heights to reach. Horizontal grab bars should be located 33 to 36 inches above the finished floor around toilets,

33 to 36 inches above the floor of the bathtub and close enough to the shower head wall in order to support a person adjusting

water temperature. Vertical mount is ideally wall mounted on the entrance to the tub and directly under the shower head to assist

with safe entry and to prevent from falling while showering. The

nie wieder bohren

grab bars are also ideal to mount directly to the

tub edge to aid children in safe entry and exit from the bathtub.

Summary of content (12 pages)

PAGE 1
GRIPP Grab Bar Installation, Warranty, Safety and Care Instruction Guide GB3200 (1(1-1/4” diameter) and GB3800 Series (1(1-1/2” diameter) diameter) Thank you for purchasing the nie wieder bohren (German for “no drilling required”) heavy duty grab bars. nie wieder bohren Germany is an innovation leader in fastening technology.
PAGE 2
Mounting: nie wieder bohren - no drilling required technology mounting system: (recommended (recommended for Tile, Natural Stone, Glass, Glass, Metal and Most Plastics*) Components: Tools required: -Grab bar -GB00002-NDR (mounting kit) -Level -Clean dry cloth Note: Failure to follow the instruction sheet completely may result in a product failure and will void the warranty. Please be sure to carefully read and follow the instructions for optimum results and safety. 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
PAGE 3
2 6 7 11 12 3 4 5 8 9 10 13 14 Adapter Removal: The nie wieder bohren adapter system can be removed from any hard surface by applying torsion I 1. Remove grab bar from the adapters by taking out the screws and spacers (see pic. 7). 2. Use channel locks and firmly turn the adapter applying consistent pressure (see pic. 15). 3. Remove residual adhesive from surface using a razor knife and wipe with acetone remover as needed. For rough surfaces, a coarse brush can also be used.
PAGE 4
Safety Warning: - Follow instructions carefully to ensure proper performance as well as to reduce the chance of injury. - When installed properly on a sturdy surface, the nie wieder bohren system exceeds the ADA (Americans with Disabilities Act) requirements for a weight capacity of 250lbs.However, grab bars are not designed to support a person’s total weight and rather to provide for stability and assistance.
PAGE 5
Frequently Asked Questions >What What kind of surfaces is the nie wieder bohren system suitable for? Almost any smooth or rough surface is suitable if it is firm and able to bear the load in question. The nie wieder bohren system is perfect for high-quality materials that one does not want to damage by drilling. nie wieder bohren is suitable with ceramic (tiles), stone, marble, granite, glass, concrete, metal, wood and many plastics.
PAGE 6
>Is Is the adhesive toxic? No. Contact with skin is harmless. After use, rinse off with soap and water. In case of contact with eyes, rinse thoroughly with water for several minutes, keeping the eyelid open. If adhesive is swallowed consult a doctor immediately. >Is Is the adhesive free of formaldehyde? Yes. >How How should I dispose of the adhesive? You can put hardened or dried adhesive remnants right into the household trash. The same applies to the adapter after dismantling.
PAGE 7
Guía de Instalación, Garantía, Seguridad e Instrucciones de Cuidado para Las Barras de Apoyo GRIPP Serie GB3200 (1(1-1/4’’de 1/4’’de diámetro) y la serie GB3800 (1(1-1/2" de diámetro) Gracias por la compra de la barra de alta resistencia nie wieder bohren (en alemán "nunca perfore de nuevo")- Alemania es líder en innovación de la tecnología de fijación.
PAGE 8
Montaje: nie wieder bohren azulejo, zulejo, piedra natural, vidrio, metal y la mayoría de bohren - sistema de nunca perforar de nuevo: (Recomendado para a los plásticos*) Componentes: Herramientas necesarias: - Barra de Apoyo - GB00002-NDR (kit de montaje) - Nivel - Paño Limpio y Seco Nota: El no cumplir todos los pasos que indica la hoja de instrucciones puede proporcionar la falla del producto y así anulando la garantía.
PAGE 9
de la barra para asegurar el drenaje adecuado del agua. agua. Recomendación: la placa se fija fácilmente si se gira en la posición correcta y luego adjunta. El anillo es concéntrico y funciona mejor cuando se "gira en su lugar" (ver fig. 14). 13.Prueba la instalación firme y correcta de la barra, aplicando un poco de presión. Como Quitar el Adaptador: El sistema adaptador nie wieder bohren se puede quitar de cualquier superficie dura, mediante la aplicación de torsión I 1. 2. 3. II 1. 2. 3. 4. 5.
PAGE 10
Garantía de por Vida Limitada - Si el producto falla en su forma, acabado o su función debido a los materiales o mano de obra en cualquier momento durante la vida útil del producto, Innovative Product Sales LLC le reemplazará el producto de forma gratuita. Esto no incluye cualquier reclamo que surja de un error de instalación, abuso, daño, alteración, mal uso o desgaste normal. Contáctenos a 7345 West Friendly Ave.
PAGE 11
> ¿Puedo También Utilizar el Sistema al Aire Aire Libre? ¡Sí! El adhesivo no se descompondrá, es resistente a la radiación UV, es resistente al agua y no dañado por congelación (sin embargo, se debe aplicar a una temperatura entre 41°F y 104°F (+5°C y +40°C). > ¿Puede El sistema Fallar con el Tiempo? Por supuesto que no! Una vez que el sistema de nie wieder bohren haya sido montado correctamente, el componente único de su adhesivo especial, garantiza un enlace permanente.
PAGE 12
> ¿Es el adaptador rere-utilizable? No. El adaptador está diseñado para ser utilizado sólo una vez sobre la base de la tecnología patentada "pass through" tecnología necesaria para la curación. Para volver a montar sus accesorios será necesario comprar otro kit adaptador. > ¿Se puede utilizar el sistema para sujetar objetos distintos de los que se suministran junto con el sistema nie wieder bohren? El sistema está diseñado para ser utilizado sólo con los accesorios nie wieder bohren.