Aluminum Mirror READ THE INSTRUCTIONS CAREFULLY, familiarize yourself with all the parts as shown in the exploded view. The exploded view will also provide a helpful reference when relating to the location of the various parts and how they are mounted.
PARTS LIST. ® MIRROR(1 PCS) 11/2" SCREW(2 PCS) WALL PLUG(2 PCS) WARNING: Safety glasses should always be worn when working with drill.
Choose the Mirror direction vertical or horizontal. Follow the appropriate diagram below . Vertical Assembly Horizontal Assembly Select the desired position of the mirror. Level and mark the location.
STEP 2 Mark the drilling locations and ensure marking are leveled, based on vertical or horizontal mounting. See chart below. Model No. Vertical Horizontal Assembly® | Assembly® 2436 4" ™ 3036 4" ™ 4836 4" ™ 3059 4" ™ 3071 for vertical STEP 3 7" for horizontal 3.1 Drill holes about 1 1/2" deep at each of the marked locations. 3.2 Insert wall plugs 3) . STEP 3.
STEP 4 Install Screw (2) . Leave a gap of 1/8" between the head of the screw and the wall. 1/8" {i [VINE (2) SCREW 11/2" STEP 5 Tear off the double-sided tape film from Pad, place the mirror against the wall and slide it down, as shown in Figure 2.
