Operation Manual

You can select the power by rotating the dial, from the left to

right, 1/128 – 1/64 – 1/32 – 1/16 – 1/8 – 1/4 – 1/2 – 1/1 (Full)

power.

Select your desired F--stop and / or shutter speed. Point the

subject and press the shutter.

Set the camera shooting mode to either [ A ] or [ M ].

Rotate the dial to “M” mode then press the Set button.

Set Di700A to the camera’s hotshoe and press the on/off switch to

power on.

In some occasions, or for special expression, you may need your

own flash exposure instead of the automatic controlled exposure.

You can set Di700A for non-automatic flash mode, and select the

desired flash power from 8 different levels

Manual Exposure Flash

-2.0

-1.5

-1.0

-0.5

+0.5

+1.0

+2.0

+1.5

1/128 1/64 1/32 1/16 1/8 1/4 1/2 1/1

Press the on/ off switch once again to lock this condition on your

flash. (Press it again to release the lock)