INSTRUCTION MANUAL R Wine & Beverage Cooler MODEL: NPKBDUAL01/NPKBDUAL02 Phone:+1(818)600-2502
CONTENTS IMPORTANT SAFEGUIDES...................................................P.4 PRODUCT FEATURES......................................................................P.6 INSTALLATION...................................................................................P.6 OPERATING THE APPLIANANCE..............................................P.7 CARE AND MAINTENANCE.......................................................P.9 TROUBLESHOOTING..................................................................P.
Thanks for choosing our products, hope that our products can bring you different feelings. Please read the following safety and operating instructions carefully before using the wine cooler. IMPORTANT SAFEGUIDES Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. Read all instructions before using the wine chiller. Child entrapment and suffocation are not problems of the past.
1.This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 2. Children should be supervised to ensure that they do not play with the appliance. 3.
Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance. ● It is recommended that a separate circuit, serving only your appliance be provided. Use receptacles that cannot be turned off by a switch or pull chain. ● Never clean appliance parts with flammable fluids. These fumes can create a fire hazard or explosion.
PRODUCT FEATURES • Dual cooling zones for storing different beverages and wines together.
How to install the handle: 1)Pull away the sealing gasket where the handle is to be installed as shown in Fig1. The gasket is easily displaced by hand. No tools are necessary. 2)Align the handle with the screws installed. Tighten the screws using a Phillips head screwdriver until the handle sets both flush and secured tightly against the door frame. (DO NOT over tighten as this will cause damage to the handle assembly). 3) Install the sealing gasket to its original position.
Power On /Off ● When the appliance is plugged into a power outlet, it powers on automatically. ● Touch the power button to turn on the appliance.Press power button for 3 seconds to turn off the appliance if needed. Light Control ● Touch the lighting button to turn on (or turn off) the interior cool LED lighting. Set Temperature Touch the or button to increase or decrease the temperature of the selected zone.
Storage CARE AND MAINTENANCE Cleaning your wine cooler Turn off the power, unplug the appliance, and remove all items including shelves Wash the inside surfaces with a warm water and soft cloth Wash the shelves with a mild detergent solution Wring excess water out of the sponge or cloth when cleaning area of the controls, or any electrical parts Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a clean soft cloth.
Moving your wine chiller ●Remove all items (bottles) ●Tape down securely all loose items (shelves) inside your appliance. ●Turn the adjustable leg up to the base to avoid damage. ●Tape the door shut. Be sure the appliance stays secure in the upright position during transportation. If you absolutely need to transport the chiller horizontally, transport the chiller on its back (door on top). Also protect outside of appliance with a blanket, or similar item.
Warranty Terms Warranty Period 1. Customers are entitled to replacement or free repair service in case of quality defect(s) found in the product within 15 days upon receipt of the product. 2. Customers are entitled to free repair service from NIPUS for any product proven defective in material or workmanship that results in product failure during normal consumer usage and conditions within the valid warranty period, which is 12 months counting from the date of selling.