Use and Care Manual

ManualsBrandsNINJA ManualsAppliancesDetect Duo Power 72 oz. 10 Speed Black Pro Blender + Single Serve Traditional Blender with Blend Sense Technology -TB301

ninjakitchen.com

DETECT POWER BLENDER DUO PRO

WITH BLENDSENSE™ TECHNOLOGY

TB300 Series | Owner’s Guide

1 Read all instructions prior to using the appliance and its accessories.

2 Carefully observe and follow all warnings and instructions. This unit contains electrical connections

and moving parts that potentially present risk to the user.

3 Take your time and exercise care during unpacking and appliance setup. This appliance contains

sharp, loose blades that can cause injury if mishandled.

4 Take inventory of all contents to ensure you have all parts needed to properly and safely operate

your appliance.

5 All blades are sharp and loose. Handle carefully.

6 A LWAYS exercise care when handling the Hybrid Edge Blades Assembly. The blades are sharp. ONLY

grasp the Hybrid Edge Blades Assembly by the outer perimeter of the blade assembly base. Failure

to use care when handling the blade assembly will result in a risk of laceration.

7 This product is provided with a Total Crushing® Blades (Stacked Blade Assembly). ALWAYS exercise

care when handling blade assemblies. The blade assemblies are sharp and are NOT locked in place

in their containers. The blade assemblies are designed to be removable to facilitate cleaning and

replacement if needed. ONLY grasp the blade assembly by the top of the shaft. Failure to use care

when handling the blade assemblies will result in a risk of laceration.

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY

WARNING: To reduce the risk of injury, ﬁre, electrical shock or property damage, basic safety

precautions must always be followed, including the following numbered warnings and subsequent

instructions. Do not use appliance for other than intended use.

WARNING: Handle the Hybrid Edge™ Blades Assembly with care, as the blades are sharp and loose.

WARNING: Remove utensils prior to processing. Failure to remove may cause the Single-Serve Cup

to be damaged or to shatter, which may cause personal injury.

WARNING: Do not blend hot, eervescent, or carbonated liquids. Doing so may cause excessive

pressure buildup, resulting in risk of laceration and or the user being burned.

WARNING: Remove the Hybrid Edge Blades Assembly from the Single-Serve Cup upon

completion of blending. Do not store ingredients before or after blending them in the cup with the

blade assembly attached. Some foods may contain active ingredients or release gases that will expand

if left in a sealed container, resulting in excessive pressure buildup that can pose a risk of injury.

Read and review instructions for operation and use.

Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if

the warning included with this symbol is ignored.

For indoor and household use only.

When using electrical appliances, basic safety precautions should always be followed, including the following:

NOTE: Not all parts and accessories included with every conﬁguration.

Summary of content (7 pages)

PAGE 1
DETECT POWER BLENDER DUO PRO WITH BLENDSENSE™ TECHNOLOGY TB300 Series | Owner’s Guide IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY Read and review instructions for operation and use. Indicates the presence of a hazard that can cause personal injury, death, or substantial property damage if the warning included with this symbol is ignored. For indoor and household use only.
PAGE 2
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ ALL INSTRUCTIONS BEFORE USE • FOR HOUSEHOLD USE ONLY 8 T urn the appliance OFF, then unplug the appliance from the outlet when not in use, before assembling or disassembling parts, and before cleaning. To unplug, grasp the plug by the body and pull from the outlet. NEVER unplug by grasping and pulling the flexible cord. 9 B efore use, wash all parts that may contact food. Follow washing instructions covered in this instruction manual.
PAGE 3
PARTS A Pitcher Lid B Total Crushing® Blades (Stacked Blade Assembly) C 72 oz.* Power Blender & Processor Pitcher D Spout Lid E Hybrid Edge™ Blades Assembly F 24 oz. Single-Serve Cup G Motor Base (attached power cord not shown) BLENDSENSE™ TECHNOLOGY A D B Intelligent BlendSense™ program that revolutionizes traditional blending by sensing your ingredients and blending to perfection every time.
PAGE 4
USING THE CONTROL PANEL USING THE POWER BLENDER & PROCESSOR PITCHER NOTE: Press the dial to START and/or STOP any program. IMPORTANT: • Review all warnings at the beginning of this Owner’s Guide before proceeding. •A s a safety feature, if the pitcher and lid are not properly installed, the timer will display “... ...” and the motor will be disabled. If this happens, repeat step 5 on this page.
PAGE 5
USING THE SINGLE-SERVE CUP IMPORTANT: Review all warnings at the beginning of this Owner’s Guide before proceeding. WARNING: Handle the Hybrid Edge Blades Assembly with care, as the blades are sharp. WARNING: Remove utensils prior to processing. Failure to remove may cause the Single-Serve Cup to be damaged or to shatter, which may cause personal injury. WARNING: Do not blend hot, effervescent, or carbonated liquids.
PAGE 6
TROUBLESHOOTING GUIDE WARNING: To reduce the risk of shock and unintended operation, turn power off and unplug unit before troubleshooting. Unit doesn’t turn on. • Make sure unit is plugged in. Display will read “- -” once connected to power. • Place container on base and rotate it clockwise until container clicks into place. Press the Power to turn unit on, and the BlendSense Program will illuminate indicating the unit is ready for use. button Display reads “Er”.
PAGE 7
REGISTER YOUR PURCHASE registeryourninja.com Scan QR code using mobile device RECORD THIS INFORMATION Model Number: �� Serial Number: �� TECHNICAL SPECIFICATIONS Voltage: 120V~, 60Hz Power: 1200 Watts Date of Purchase: �� (Keep receipt) Store of Purchase: �� SharkNinja Operating LLC US: Needham, MA 02494 CAN: Ville St-Laurent, QC H4S 1A7 1-877-646-5288 ninjakitchen.com Illustrations may differ from actual product.