Operation Manual

CUSTOM

SETTING

Using the Custom Setting feature, you

can create a combination of functions

that is different from the initial factory

settings. The functions listed in this

section can be selected with the

F75/F75D.

is cancelled, film advances and Z disappears from the LCD panel when the

second shot is taken.

• To take more than two shots on the same frame, rotate the Command Dial while

pressing the ¸ button again after the first shot is taken by depressing the shutter

release button and while Z is blinking so Z appears without blinking. Repeat

this operation as many times as you wish to continue taking pictures on the same

frame.

• To cancel multiple exposure, rotate the Command Dial while pressing the ¸

button so Z disappears from the LCD panel, set Auto Exposure Bracketing, or

set the exposure mode to a or Vari-Program. Film is advanced and frame

counter counts down when the multiple exposure is cancelled before or during

multiple exposure operation.

Multiple Exposure—continued

Standard compensation value in multiple exposure

Exposure Compensation is

necessary depending on the

number of exposures in multiple

exposure since more than one

image is exposed in the same

frame.

Number of exposures Compensation value

Two –1.0 EV

Three –1.5 EV

Four –2.0 EV

Eight or nine –3.0 EV

Check points

• Multiple Exposure cannot be performed in a or Vari-Program.

• Multiple Exposure and Auto Exposure Bracketing (page 66) cannot be set

simultaneously.

Compose picture, confirm focus indicator / and shoot.

• The first shot is taken and Z and frame

counter blink in the LCD panel when the

shutter release button is fully depressed. The

frame counter in the LCD panel does not

count down and the film does not advance,

and multiple exposures can be taken from the

second shutter release. The multiple exposure

F75 (En) 03.1.23 11:09 AM Page 70