Setting Guide(Movie Edition)
17
Picture Quality, Continued
Workflow Buttons and Icons Settings Tips and Tricks Viewing Movies Appendix
Modifying Picture Controls in Live View
Individual Picture Control parameters can be ne-tuned without leaving live view.
1
Display the Picture Control list.
In movie mode, press the L (Z/Q) button to view a list of Picture
Controls.
2
Select a Picture Control.
Highlight the desired Picture Control and press
2
.
3
Adjust settings.
Press
1
or
3
to highlight a setting (see below), then press
4
or
2
or tap or in the monitor to choose a value in increments of 1,
or rotate the sub-command dial or tap or to choose a value in
increments of 0.25 (the options available vary with the Picture Con-
trol selected). Repeat this step until all settings have been adjusted,
or select a preset combination of settings using Quick adjust. De-
fault settings can be restored by pressing the O (Q) button.
Picture Control Settings
Quick adjust Mute or heighten the effect of the selected Picture Control.
Manual adjustments
Sharpening Control the sharpness of outlines. Select A to adjust sharpening automatically according to the type of scene.
Contrast Adjust contrast manually or select A to let the camera adjust contrast automatically.
Brightness Raise or lower brightness without loss of detail in highlights or shadows.
Saturation Control the vividness of colors. Select A to adjust sharpening automatically according to the type of scene.
Hue Adjust hue.
Filter eects Simulate the effect of color filters on monochrome footage.
Toning Choose the tint used in monochrome footage.
4
Save changes.
Press
J
to save changes.
Modied Picture Controls
Picture Controls that have been modied from default settings are shown
by an asterisk (“
U”).