Product Manual

 Troubleshooting/Repair

If this product fails to function as expected, check the list below before consulting your local dealer or the

store where you purchased it.

l If there is a problem with the product.

Problem Cause/Solution

• Does not turn on

• Press the PWR button (top of the body).

• Check that the battery is inserted correctly.

• Replace the battery with a new one.

• Unable to measure

• Anomalous result

• Confirm the settings.

• Confirm if it can measure a large target close to you (example: a building

approx. 15 m/yd. ahead of you).

• Clean the lens surface if necessary.

• Cannot see the internal display

• Difficult to see the internal display

• Check the brightness of the internal display, and adjust it as necessary.

Cover the objective lens so that checking the internal display is easier.

• [

] is displayed in the internal

display

• Failure indication. Please contact your local dealer or the store where you

purchased the product.

l If you require a repair, please contact your local dealer or the store where you purchased the product.

Do not repair or disassemble. It may result in a serious incident.

Please note that Nikon is not responsible for any direct or indirect damage if the user attempts to repair or

disassemble the product.