User Manual

184
x
D The Count Down Display
A count down will be displayed 30 s before live view ends automatically
(0 180; the timer turns red if live view is about to end to protect the
internal circuits or, if an option other than No limit is selected for
Custom Setting c4—Monitor off delay > Live view; 0 253—5 s before
the monitor is due to turn off automatically).
Depending on shooting
conditions, the timer may appear immediately when live view is
selected. Note that although the count down does not appear during
playback, live view will still end automatically when the timer expires.
A HDMI
If the camera is attached to an HDMI
video device during live view
photography, the camera monitor will
remain on and the video device will
display the view through the lens as
shown at right.
If the device supports
HDMI-CEC, select Off for the HDMI >
Device control option in the setup menu (0 223) before shooting in
live view.
A See Also
For information on using the J button to select the center focus point
or toggle focus zoom, see Custom Setting f2 (OK button; 0 261). For
information on reducing flicker or measuring a value for spot white
balance during live view, see pages 276 and 93.