User Manual
Table Of Contents
- Q&A Index
- Quick Start Guide
- Menu Options
- Table of Contents
- For Your Safety
- Notices
- Introduction
- Basic Photography and Playback
- P, S, A, and M Modes
- User Settings: U1 and U2 Modes
- Release Mode
- Image Recording Options
- Focus
- ISO Sensitivity
- Exposure
- White Balance
- Image Enhancement
- Flash Photography
- Remote Control Photography
- Other Shooting Options
- Live View Photography
- Movie Live View
- Special Effects
- More on Playback
- Connections
- Menu Guide
- The Playback Menu: Managing Images
- The Shooting Menu: Shooting Options
- Custom Settings: Fine-Tuning Camera Settings
- The Setup Menu: Camera Setup
- The Retouch Menu: Creating Retouched Copies
- My Menu/Recent Settings
- Technical Notes
109
J
A The Picture Control Grid
Pressing the W (S) button in Step 2 on page 107 displays a Picture
Control grid showing the contrast and saturation for the selected
Picture Control in relation to the other Picture Controls (only contrast
is displayed when Monochrome is selected).
Release the W (S)
button to return to the Picture Control menu.
The icons for Picture Controls that use auto contrast and saturation
are displayed in green in the Picture Control grid, and lines appear
parallel to the axes of the grid.
A Previous Settings
The line under the value displayed in the Picture Control setting
menu indicates the previous value for the setting.
Use this as a
reference when adjusting settings.
A Filter Effects (Monochrome Only)
The options in this menu simulate the effect of color filters on monochrome photographs.
The following filter effects are available:
Option Description
Y Yellow
Enhances contrast.
Can be used to tone down the brightness of the sky in
landscape photographs.
Orange produces more contrast than yellow, red
more contrast than orange.
O Orange
R Red
G Green Softens skin tones.
Can be used for portraits.
Note that the effects achieved with Filter effects are more pronounced than those
produced by physical glass filters.
A Toning (Monochrome Only)
Pressing 3 when To ni ng is selected displays saturation options.
Press 4 or 2 to adjust saturation.
Saturation control is not available
when B&W (black-and-white) is selected.