Manualshelf

Full Product Manual

ManualsBrandsNight Owl ManualsSmart Doorbells1080p Wired Video Doorbell with Cloud Recording & Mounts
11121314151617181920
18
4
Remove the faceplate from the Night Owl Doorbell. Insert the small end of the provided USB cable into
the micro USB port on the Doorbell.
Connect the other end of the cable to a USB power adapter and plug it into an outlet. If you do not
have a USB power adapter, you may use a USB charging port.
Be patient for a minute or two as the Doorbell powers up. Listen for the audio message “Doorbell is in
pairing mode.” “PAIRING MODE” status is also identied by white LEDs “Spinning” in a “Clockwise”
direction.
3
5
Doorbell is in
Pairing Mode.
NOTE: Use a at tool to carefully remove the cover from the micro USB input. You must replace the cover before
mounting the Doorbell.
NOTE: USB Power Adapter not included.