Installation Manual

Power on the replacement

camera using the camera

power adapter.

By default, each camera within your Wireless NVR kit comes pre-paired to

the Wireless NVR. Additionally, your wireless NVR has its own built-in Wi-Fi

for secure, uninterrupted video transmission and recording. Pairing allows

for the wireless transmission coming from the camera to be detected by

the Wireless NVR. However, if you have a camera that needs to be replaced

while under warranty, the replacement camera will similarly need to be

paired to the NVR.

NOTE: When pairing a Night Owl add-on camera, refer to “Add-on cameras Quick Setup Guide”.

To pair a replacement camera to your NVR, please use the below steps:

Go to the Camera Menu and

Select the Add Camera tab on

the left side of the menu.

The top portion of the screen

will list cameras that have

been found but not yet paired.

The bottom portion of the screen

will show all cameras that are

currently paired to the NVR.

Pairing a Replacement Wireless Camera

With the NVR connected to a

TV/Monitor, right click on your

mouse and navigate to the Main

Menu using the options bar.

NOTE: The Reset Button location

depends on the camera version.

NOTE: This should be done

locally at the NVR to avoid

interference.