Assembly Instruction

Fasten Stretcher Brackets to Arm
See below for
Preparation of arms
for assembly.
i
Hardware in this box
2
3
Page 1 of 1
Assembly
Instructions
1
One pair of Bifold Arms
i
Manhattan-0801
4
Tap Wooden Dowels all the way into the middle
hole before assembly to Arms.
Fit Wooden Dowels
5
BODY INSTRUCTIONS:
Instructions for assembly of the Arms to the Bifold
Body are packed in the Bifold Body box.
Assemble the Bifold Body
Instructions for Bifold Body assembly, are packed in the Body box.
BIFOLD FUTON FRAME
FUTON ARMS
Inside View
Outside View
Stretcher Bracket
x 4 Pieces
Allen Key
x 1 Piece
Wooden Dowel
x 4 Pieces
80mm Bolts x 8 Pieces:
For Front Leg & Back Leg
16mm Bolts x 4 Pieces:
For the Stretcher Backets
Barrel Nuts x 8 Pieces
Cleat
A.
C.
Insert the Stretcher Bracket Cleat
into the hole provided.
Each arm requires two brackets, front and back.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Stretcher
Bracket
16mm Bolt
Allen Key
Hole for
cleat
Leg
Dowel
Hole
Hole for
bolt
Wooden Dowel
Stretcher
(BODY BOX)
Middle hole