Assembly Instruction

Fasten Stretcher Brackets to Arm
See below for
Preparation of arms
for assembly.
i
Hardware in this box
2
3
Page 1 of 1
4
Assembly
Instructions
1
One pair of Bifold Arms
Instructions for Bifold Body assembly, are packed in the Body box.
i
Fit Wooden Dowels
Corona-1000
Tap Wooden Dowels all the way into the middle
hole before assembly to Arms.
5
BODY INSTRUCTIONS:
Instructions for assembly of the Arms to the Bifold
Body are packed in the Bifold Body box.
Assemble the Bifold Body
BIFOLD FUTON FRAME
FUTON ARMS
Inside View
Outside View
Stretcher Bracket
x 4 Pieces.
16mm bolts
x 4 Pieces
Allen Key
x 1 Piece.
Barrel nuts
x 8 Pieces
30mm long dowel
x 4 Pieces.
60mm bolts x 8 Pieces.
Cleat
Hole for
cleat
Leg
Dowel
Hole
Stretcher
Bracket
16mm Bolt
Allen Key
A.
C.
Insert the Stretcher Bracket Cleat
into the hole provided.
Each arm requires two brackets, front and back.
B. IMPORTANT: Don't fully tighten Bracket until
Stretchers are all in place for easy alignment.
Hole for
bolt
Wooden Dowel
Stretcher
(BODY BOX)
Middle hole