Datasheet

ManualsBrandsNIC COMPONENTS ManualsCoils & ChokesInductor SMD 1206 120 nH 800 mA 2000 pc(s)

NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com

Speciﬁ cations are subject to change

COMPONENT DIMENSIONS (mm):

Type Case Size

A max. B max. C max. D typ. E typ. F typ.

NIN-HK 0402

1.19 0.64 0.66 0.20 0.523 0.215

NIN-HJ 0603

1.80 1.12 1.02

0.38

0.76 0.33

NIN-HD 0805

2.29 1.68 1.55

0.51

1.27 0.50

NIN-HC 1008

2.92 2.79 2.29 0.51 2.00 0.50

NIN-HE 1206 3.56 2.16 1.52 .051 1.60 0.50

NIN-HA 1210 3.65 2.95 2.70 0.51 2.10 .050

NIN-HB 1812 4.95 3.81 3.43 1.78 2.90 .058

Type

H typ. I typ. J typ.

NIN-HK

0.65 0.35 0.50

NIN-HJ

1.02 0.64 0.64

NIN-HD

1.78 1.02 0.76

NIN-HC

2.54 1.02 1.27

NIN-HE 1.93 1.02 1.78

NIN-HA 3.02 1.02 1.78

NIN-HB 3.05 1.14 3.00

RECOMMEND LAND PATTERN

DIMENSIONS (mm)

Wirewound Chip Inductors

NIN-H Series

• SIZES K(0402), J (0603), D (0805), C (1008), E (1206), A (1210) and B (1812)

• HIGH Q, HIGH CURRENT AND HIGH SRF CHARACTERISTICS

• REFLOW SOLDERING APPLICABLE

• HIGH INDUCTANCE AVAILABLE IN SMALL SIZE

• EMBOSSED PLASTIC CARRIER PACKAGING FOR AUTOMATIC PICK-PLACE*

*0402 PUNCHED CARDBOARD CARRIER

FEATURES

ENVIRONMENTAL CHARACTERISTICS

Speciﬁ cations

Case Size Code

0402 (K) 0603 (J) 0805 (D) 1008 (C)

Inductance Range 1.8nH ~ 120nH 1.6nH ~ 470nH

2.2nH ~ 1.0μH 4.7nH ~ 8.2μH

Inductance Tolerance See Product Standard Values Tables

Operating Temperature Range

-40°C ~ +125°C

Test Speciﬁ cations Test Method & Condition

Solderability 75% Min. Coverage After 3 sec. dip in +230°C soldering pot (post ﬂ ux)

Resistance to Soldering Heat

(1) No evidence of damage

(2) Inductance change ±5% of initial value

(3) Q factor within ±10% of initial value

(±20% for 0402 & 0603 case sizes)

After 5 seconds at +260°C (with pre-conditioning)

Humidity

(1) No evidence of damage

(2) Inductance change ±5% of initial value

(±10% for 0402 case size)

(3) Q factor within ±10% of initial value

(±20% for 0402 & 0603 case sizes)

After 500 hours at 60°C and 90 ~ 95% RH

(0402 case size - after 96 hours 50°C and 90 ~ 95% RH)

Low Frequency Vibration After 2 hrs per axis, 10 ~ 55Hz, 1.5mm amplitude

Thermal Shock

After 100 cycles (10 cycles 0402) at -40°C and +125°C

(30 minutes at each temperature)

Low Temperature Storage After 500 hrs at -40°C

High Temperature Load Life

(1) No evidence of damage

(2) Inductance change ±10% of initial value

(±20% for 0402 case size)

(3) Q factor within ±10% of initial value

(±20% for 0402 & 0603 case sizes)

After 500 hrs at +125°C with rated DC current

(0402 case size - after 1,000 hrs at +85°C)

Humidity Load Life No evidence of short or open circuit

After 500 hrs at 60°C with 90 ~ 95% RH with rated DC current

(0402 case size- 1,000 hrs at +40°C)

Speciﬁ cations

1206 (E) 1210 (A) 1812 (B)

Inductance Range

3.3nH ~ 1.2μH 3.9nH ~ 8.6μH 1.0μH ~ 33μH

Inductance Tolerance See Product Standard Values Tables

Operating Temperature Range -40°C ~ +125°C

Summary of content (9 pages)

PAGE 1
Wirewound Chip Inductors NIN-H Series FEATURES • • • • • SIZES K(0402), J (0603), D (0805), C (1008), E (1206), A (1210) and B (1812) HIGH Q, HIGH CURRENT AND HIGH SRF CHARACTERISTICS REFLOW SOLDERING APPLICABLE HIGH INDUCTANCE AVAILABLE IN SMALL SIZE EMBOSSED PLASTIC CARRIER PACKAGING FOR AUTOMATIC PICK-PLACE* *0402 PUNCHED CARDBOARD CARRIER Specifications Case Size Code 0603 (J) 0805 (D) 1.6nH ~ 470nH 2.2nH ~ 1.0μH See Product Standard Values Tables -40°C ~ +125°C 0402 (K) 1.
PAGE 2
Wirewound Chip Inductors NIN-HK SERIES NIN-H Series K-SIZE (0402) STANDARD VALUES NIC P/N INDUCTANCE VALUE (nH) INDUCTANCE TOLERANCE FREQUENCY (MHz) Q FACTOR SRF (MHz) Minimum Rated DC Resistance (ohms) Rated DC Current (mA) NIN-HK1N8_TRF 1.8 S, J, K 250 20@250MHz >6000 0.043 950 NIN-HK2N0_TRF 2.0 S, J, K 250 19@250MHz 7000 0.084 1040 NIN-HK2N2_TRF 2.2 S, J, K 250 22@250MHz >6000 0.058 820 NIN-HK3N0_TRF 3.0 S, K 250 24@250MHz >6000 0.063 790 NIN-HK3N3_TRF 3.
PAGE 3
Wirewound Chip Inductors NIN-HJ SERIES NIC P/N NIN-H Series J-SIZE (0603) INDUCTANCE VALUE (nH) STANDARD VALUES INDUCTANCE TOLERANCE FREQUENCY (MHz) Q FACTOR SRF (MHz) Minimum Rated DC Resistance (ohms) Rated DC Current (mA) NIN-HJ1N6_TRF 1.6 S, K 250 22@250MHz >6000 0.035 1150 NIN-HJ1N7_TRF 1.7 S, J,K 250 16@250MHz >6000 0.043 1000 NIN-HJ1N8_TRF 1.8 S, J, K 250 18@250MHz >6000 0.043 1000 NIN-HJ3N3_TRF 3.3 S, J,K 250 25@250MHz >6000 0.059 850 NIN-HJ3N6_TRF 3.
PAGE 4
Wirewound Chip Inductors NIN-HJ SERIES NIN-H Series J-SIZE (0603) STANDARD VALUES INDUCTANCE VALUE (nH) INDUCTANCE TOLERANCE FREQUENCY (MHz) Q FACTOR SRF (MHz) Minimum Rated DC Resistance (ohms) Rated DC Current (mA) NIN-HJR18_TRF 180 G, J, K 100 25@250MHz 1300 1.38 180 NIN-HJR20_TRF 200 G, J, K 100 25@250MHz 1250 1.9 150 NIN-HJR22_TRF 220 G, J, K 100 25@100MHz 990 2.
PAGE 5
Wirewound Chip Inductors NIN-HC SERIES NIN-H Series C-SIZE (1008) STANDARD VALUES NIN-HC4N7_TRF 4.7 G, J, K 50/1500 50@1500MHz SRF (MHz) Minimum >6000 NIN-HC100_TRF 10 G, J, K 50/500 50@500MHz 4100 0.08 1000 NIN-HC120_TRF 12 G, J, K 50/500 50@500MHz 3300 0.09 1000 NIN-HC150_TRF 15 G, J, K 50/500 50@500MHz 2500 0.13 1000 NIN-HC180_TRF 18 G, J, K 50/350 50@350MHz 2500 0.11 1000 NIN-HC220_TRF 22 G, J, K 50/350 55@350MHz 2400 0.
PAGE 6
Wirewound Chip Inductors NIN-HE SERIES NIN-H Series D-SIZE (1206) STANDARD VALUES 20@300MHz 30@300MHz SRF (MHz) Minimum 6200 5500 Rated DC Resistance (ohms) 0.07 0.07 100/300 40@300MHz 4000 0.09 1000 G, J, K 100/300 40@300MHz 3200 0.09 1000 G, J, K 100/300 40@300MHz 3200 0.12 1000 18 G, J, K 100/300 45@300MHz 2800 0.12 1000 NIN-HE220_TRF 22 G, J, K 100/300 50@300MHz 2200 0.12 1000 NIN-HE270_TRF 27 G, J, K 100/300 50@300MHz 1800 0.
PAGE 7
Wirewound Chip Inductors NIN-HA SERIES NIC P/N NIN-H Series D-SIZE (1210) STANDARD VALUES SRF (MHz) Minimum 6000 5800 Rated DC Resistance (ohms) 0.05 0.065 INDUCTANCE VALUE (nH) INDUCTANCE TOLERANCE FREQUENCY L/Q(MHz) Q FACTOR Rated DC Current (mA) NIN-HA3N9_TRF NIN-HA4N7_TRF 3.9 4.7 G, J, K G, J, K 100/300 100/300 30@300MHz 30@300MHz NIN-HA8N2_TRF 8.2 G, J, K 100/300 30@300MHz 5500 0.07 1000 NIN-HA100_TRF 10 G, J, K 100/300 40@300MHz 4000 0.
PAGE 8
Wirewound Chip Inductors NIN-HB SERIES NIN-H Series D-SIZE (1812) STANDARD VALUES NIN-HB1R0_TRF 1 G, J, K 7.9/50 60@50MHz SRF (MHz) Minimum 250 NIN-HB1R2_TRF 1.2 G, J, K 7.9/50 60@50MHz 230 1.2 480 NIN-HB1R5_TRF 1.5 G, J, K 7.9/50 60@50MHz 210 1.6 430 NIN-HB1R8_TRF 1.8 G, J, K 7.9/50 55@50MHz 150 2 380 NIN-HB2R2_TRF 2.2 G, J, K 7.9/50 55@50MHz 150 2.2 340 NIN-HB2R7_TRF 2.7 G, J, K 7.9/50 55@50MHz 150 3.2 300 NIN-HB3R3_TRF 3.3 G, J, K 7.
PAGE 9
Wirewound Chip Inductors NIN-H Series TAPE AND REEL DIMENSIONS (mm): TYPE A B C W NIN-HK NIN-HJ NIN-HD NIN-HC NIN-HE NIN-HA NIN-HB 0.67 ±0.05 1.25 ±0.1 1.60 ±0.1 2.35 ±0.1 2.40 ±0.1 2.96 ±0.1 3.61 ±0.1 0.66 ±0.05 1.05 ±0.1 1.25 ±0.1 2.10 ±0.1 1.90 max. 2.80 max. 3.81 max. 1.20 ±0.05 1.80 ±0.1 2.50 ±0.1 2.85 ±0.1 3.80 ±0.1 3.60 ±0.1 4.90 ±0.1 8.0 ± 0.2 8.0 ± 0.2 8.0 ± 0.2 8.0 ± 0.2 8.0 ± 0.2 8.0 ± 0.2 12.0 ± 0.