Instruction Manual

TROUBLESHOOTING TIPS

Control Button

Power On/Off

Button and

Select Button

IF THE POWER CANNOT BE TURNED ON:

The NVS2501 has an internal rechargeable battery. If you cannot turn on the

NVS2501 with the On/Off button, it may be that the internal battery has been

discharged. Connect the power adapter to the NVS2501 and push the power

button for more than 2 seconds to turn the NVS2501 on.

Adapter(12V)

Press and hold

the key for more

than two second.

21. Troubleshooting Tips

IF THE POWER ON THE NVS2501 CANNOT BE TURNED OFF VIA THE

ON/OFF BUTTON:

Press the RESET button using a toothpick or paper clip.

The RESET button will turn the power off safely so that the data stored in the hard

drive will not be lost or altered.

IF THE CONTROL KEY IS NOT RESPONDING:

If you are unable to select an operation that involves the pressing of the control

key in an up/down/left/right direction, you can still perform the [COPY] or

[VERIFY] functions of the NVS2501 by using the power (on/off) button.

First, turn on your NVS2501 by pressing the power button for over two seconds.

Next, place your memory card into the appropriate slot. When the LCD screen

shows [SAFE COPY], briefly press the power button to begin copying. Please note

that you will be initiating the “Safe Copy” function— which is slower, but is the

most reliable method of backup.

When the copying is done, remove your memory card. Now re-insert the

memory card and wait until your NVS2501 asks [VERIFY?] A brief press of the

power button will begin the “Verify” process.