User's Manual

17
7 Using Your Phone
7.1 Powering on/off
Press and hold the Red key to switch your phone on or off.
1. If there is no SIM card, SIM card is defective, or SIM card
contact is loose, you will be prompted with a warning after
powering on, Shut down and check your SIM and its
installation.
2. If inserted one GSM SIM card only into the phone,
meanwhile phone code and PIN code is turned on. When
switched on, after entering the PIN code and phone code, the
phone enter the standby mode by the current SIM.
3. If inserted two GSM SIM cards, meanwhile phone code,
PIN1 code and PIN2 code are all turned on. When switched on,
you will be prompted to enter the code one by one.
After switched on, the phone will automatically search the
network. If the phone detected authorized network, the
screen will display the network name and signal strength；
If no authorized network is found，the phone can only make
emergency calls or use non-communications features.
7.2 Making a Call
Making a domestic call
In standby mode, press the corresponding numeric keys to
enter the phone number that you want to dial, including
necessary area codes. Press the Right soft key [Clear] to
delete erroneous inputs; press the Green key 1 or the Green