Installation Sheet

Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We
recommend the use of clear silicone sealing materials. Recommended deck thru hole Ø 1.375”
1. Insert hoses through deck hole one at a time and secure spout into place with MOUNTING
STUD (1), MOUNTING BRACKING (2), and MOUNTING NUT (3). See Figure 1.
2. Attach hot/cold water supply hoses to valves in the wall. See Figure 2.
3. With the faucet handle in the OFF position, turn on the wall valves and check for leak.
Figure 1
Figure 2
3/8” COMPRESSION
OUTLET
9/16-24 UNEF
(FOR 3/8”
COMPRESSION
OUTLET
1
2
3
NWP-FE-8703 2001 CARNEGIE AVE, SANTA ANA CA 92705 02/01/18
Rev NC [phone] EN-3528
WWW.NEWPORTBRASS.COM