Installation

INSTALLATION INSTRUCTIONS

HOT/ COLD WATER DISPENSER

Model No’

106, 107,108, 1030-5603,

2470-5603, 1200-5603, 2940-5603,

3170-5603, 3200-5603, 3210-5603,

3160-5603, 3180-5603, 3190-5603,

3220-5603,3310-5603

Congratulations on the purchase

of this Brasstech product,

an excellent choice that will give you

years of quality service and enhance

the look and style of your home.

106

PAGE 1
INSTALLATION INSTRUCTIONS HOT/ COLD WATER DISPENSER Model No’s: 106, 107,108, 1030-5603, 2470-5603, 1200-5603, 2940-5603, 3170-5603, 3200-5603, 3210-5603, 3160-5603, 3180-5603, 3190-5603, 3220-5603,3310-5603 106 Congratulations on the purchase of this Brasstech product, an excellent choice that will give you years of quality service and enhance the look and style of your home.
PAGE 2
IMPORTANT PRODUCT INFORMATION Brasstech water dispensers are tested and warrantied only when connected to Brasstech water heater 5-036. Under normal operation, Brasstech’s line of ‘Hot’ and ‘Hot/Cold’ water dispensers may drip for a period of up to 15 minutes after each use. This condition originates from the unit’s integral hot water tank. It is caused by the thermal expansion of water occurring naturally when cool water is heated in a confined space (the tank).
PAGE 3
ATTACHING WATER CONNECTIONS TO SUPPLY AND TANK (See Fig 2) · Connect blue tube to the cold water supply utilizing the 9/16 thread if available (dependent on dispenser model) or the quick connect adapter. Do not trim this hose. · Trim the clear/grey hose as short as possible to reduce back pressure, then, connect to the center outlet tube on the top of the tank utilizing the brass coupling. · Connect the red tube to heater tank inlet, utilizing a quick-connect fitting with filter (not included).