MIRA-series-quick-start-guide
Table Of Contents
- 1 Overview
- 2 Installation Guide
- 2.1 Safety Precautions
- 2.2 Installation Precautions
- 2.3 OPS Computer Installation
- Step 1. (Optional) Unscrew the M3 screws by hand to remove the OPS Computer shielding cover.
- Step 1. (Optional) Unscrew the M3 screws by hand to remove the OPS Computer shielding cover.
- Step 2. Push the OPS Computer horizontally into the interface card slot.
- Step 3. Pass the fixing screws through the upper and lower lugs and tighten them.
- 3 Power ON/OFF
- 4 Operating the Touch Screen
- 5 Add Shortcut
- 6 Quick Setting Menu
8
1 Overview
1.1 Parts
There are electronic components in the plastic parts at the bottom of the product. If the plastic
parts are damaged, the camera or the product may malfunction. To avoid damage to the
plastic parts, please pay attention to the following:
Do not squeeze, knock at or disassemble the plastic parts.
Do not place heavy objects on plastic parts.
When transporting the product, do not impact the plastic parts at the bottom.
When transporting the product, do not place the plastic parts on the ground.
C
AUTION