Installation Guide

11
Installing Worktop
Side Support Bracket
Note: Support bracket included with locker.
X2
Fasten nuts, bolts, and lock washers.
2
Tighten nuts & bolts.
Parts Needed.
4
3
5
Align bracket.
Level bracket and ensure it is at the
same height as the base cabinet.
1
Open locker and locate holes on either side.
2 X Lock Nut
(1/4”)
4 X
Washer
(1/4”)
2 X Hex Bolt
(1/4” x 5/8”)
1x Support
Bracket