Installation Guide

12
Fastening Cabinets
Note:
All drawers must be removed prior
to fastening cabinets together.
Using pilot hole as guides, screw into second cabinet.
Do not over-tighten screws and punch through other side!
X4
Drill 3/32” pilot holes on interior wall of cabinet being fastened.
Parts Needed.
9 10
11
4 - #8 x 25mm
screws
Securing Cabinet to Wall to prevent tipping
To securely fasten the cabinet to the wall, drill 1/4” pilot holes on back inside wall of cabinet.
Use 2 lag screws to fasten the cabinet to the wall studs.
Use 2 Lag screws to
securely fasten the 3
Drawer cabinet to wall