HOME BAR SERIES 3 DRAWER BASE Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops 220 lbs. 55lbs. 55lbs. 48” Countertop. Fits over 2 Cabinets 55lbs. 72” Countertop. Fits over 3 Cabinet 55lbs. 96” Countertop. Covers over 4 Cabinet 3 Drawer Base Cabinet Max 440 lbs.
Unpacking • Begin by placing the package on a covered flat surface. • Remove all cardboard, foam packaging material and clear plastic bags. • Dispose / recycle all packaging materials. • Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing the Handles 1 3 Screw in bolts. Cabinets come with handles installed on inside of drawers/doors. 2 Parts Needed. 3 x Handle Note: 6 x Handle Bolt (M4x 30mm) Align handle to holes on doors or drawers.
Removing Drawer 4 Extend drawer fully. 6 Tilt and remove shelf rack. 5 Press plastic triggers on underside of drawer according to arrows in image. Inserting Drawer 10 3 Partially extend drawer slides. 11 Put drawer on slides and slide each drawer slide forward until you hear a click sound.
Fastening Cabinets 9 Parts Needed. 10 Note: All drawers must be removed prior to fastening cabinets together. Drill 3/32” pilot holes on interior wall of cabinet being fastened. 4 - #8 x 25mm screws 11 Using pilot hole as guides, screw into second cabinet.
Mounting the Worktop 12 Parts Needed. 13 Place worktop over cabinets and lower onto cabinets. 4 - #8 x 25mm screws 14 Drill 3/32” pilot holes on interior roof of cabinet. 15 3 X4 Tighten screws to secure cabinets.
HOMEBAR SERIES WINE STORAGE CABINET Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops 220 lbs. 65lbs. 48” Countertop. Fits over 2 Cabinets 65 lbs. 65 lbs. 72” Countertop. Fits over 3 Cabinets 65 lbs. 96” Countertop. Covers over 4 Cabinets Bottle Cabinet Max 480lbs.
Unpacking • Begin by placing the package on a covered flat surface. • Remove all cardboard, foam packaging material and clear plastic bags. • Dispose / recycle all packaging materials. • Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing the Handles 1 3 Screw in bolts. Cabinets come with handles installed on inside of drawers/doors. 2 Parts Needed. 2 x Handle Note: 4 x Handle Bolt (M4 x22mm) Align handle to holes on doors or drawers.
Removing Pull-out Rack 4 Partially extend rack. 5 Pull right side latch up. Right Side 6 Push left latch down. Left Side 7 Slide rack out. Slide Out Inserting Drawer 8 Align rails and slide in.
Fastening Cabinets 9 Parts Needed. 10 Note: Remove wine rack and pull-out rack to make fastening cabinets easier. Drill 3/32” pilot holes on interior wall of cabinet being fastened. 4- #8 x 25mm screws 11 Using pilot hole as guides, screw into second cabinet.
Mounting the Worktop 12 Parts Needed. 13 Place worktop over cabinets and lower onto cabinets. 4- #8 x 25mm screws 14 Drill 3/32” pilot holes on interior roof of cabinet. 15 3 Tighten screws to secure cabinets.
Adjusting The Door Hinges Using a Philips screwdriver, the doors can be adjusted: Left, right, forwards and backwards. 16 To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise. A 17 To adjust the gap between the doors and frame, turn the screw (B) clockwise or counterclockwise. B Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions. Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
HOME BAR SERIES DISPLAY BASE Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops 220lbs. 25 lbs. 48” Countertop. Fits over 2 Cabinets 25 lbs. 72” Countertop. Fits over 3 Cabinet 25 lbs. 205 lbs. Bottle Display Base Cabinet Max 500lbs. 96” Countertop.
Unpacking • Begin by placing the package on a covered flat surface. • Remove all cardboard, foam packaging material and clear plastic bags. • Dispose / recycle all packaging materials. • Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing the Handles 1 3 Screw in bolts. Cabinets come with handles installed on inside of drawers/doors. 2 Parts Needed. 2 x Handles Note: 4 x Handle Bolt M4 x 22mm Align handle to holes on doors or drawers.
Fastening Cabinets 4 Parts Needed. 5 Note: All shelves must be removed prior to fastening cabinets together. Drill 3/32” pilot holes on interior wall of cabinet being fastened. 4- #8 x25mm screws 6 Using pilot hole as guides, screw into second cabinet.
Mounting the Worktop 7 Parts Needed. 8 Place worktop over cabinets and lower onto cabinets. 4- #8 x25mm screws 9 Drill 3/32” pilot holes on interior roof of cabinet. 10 3 Tighten screws to secure cabinets.
Inserting Cabinets Shelves on an angle 11 Open cabinet doors. Attach shelf clips to desired height. 13 4 Insert rack at a slight angle and position over shelf supports. 15 Ensure shelf supports sits in groove on lower edge of rack. 12 The shelf supports are inserted into front and middle hole positions. 14 16 Lower shelf down onto shelf supports. Insert remaining shelves.
Inserting Cabinets Shelves Horizontal 17 Open cabinet doors. Attach shelf clips to desired height. 19 Insert rack at a slight angle and position over shelf supports. 21 Lower shelf down onto shelf supports. 18 The shelf supports are inserted into front and back holes. 20 22 Lower shelf down onto shelf supports. Insert remaining shelves.
Adjusting The Door Hinges Using a Philips screwdriver, the doors can be adjusted: Left, right, forwards and backwards. 23 To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise. A 24 To adjust the gap between the doors and frame, turn the screw (B) clockwise or counterclockwise.
HOME BAR SERIES SHORT WALL DISPLAY Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops (for Base cabinets only) 50lbs. 25 lbs. 48” Countertop. Fits over 2 Cabinets 25 lbs. 72” Countertop. Fits over 3 Cabinets 50lbs. 96” Countertop. Covers over 4 Cabinets Short Display Cabinet Max 150lbs.
Unpacking • • • • • Begin by placing the package on a covered flat surface. Remove all cardboard, foam packaging material and clear plastic bags. Dispose / recycle all packaging materials. Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing the Handles 1 3 Screw in bolts. Cabinets come with handles installed on inside of drawers/doors. 2 Parts Needed. 2 x Handle Note: 4 x Handle Bolt M4 x 22mm Align handle to holes on doors or drawers.
Inserting Glass Shelves 4 Open cabinet doors. Install shelf pins at desired height. 5 Ensure pins are installed at level height. 6 Insert glass shelf at a slight angle. 7 Position over shelf supports . 8 Lower shelf down onto shelf supports. 9 Repeat steps 1-4 for second shelf.
Mounting Cabinets 10 Use stud finder to locate the studs and mark the wall with a pencil. 11 Gather parts. 4 x Lag Screw 4 x Threaded Washer 6mm x 55mm 12 4 x Threaded Caps Near the top of the cabinet, drill 1/4” holes through the back of the cabinet that are in line with marked studs. Repeat for drilling two holes near the bottom of the cabinet. Pilot Holes Place cabinet flush against wall and attach using screws and washers. Wall Studs Wall Studs 13 14 Use threaded caps to cover screws.
Fastening Cabinets 15 Parts Needed. 16 Note: All shelves must be removed prior to fastening cabinets together. Drill 3/32” pilot holes on interior wall of cabinet being fastened. 4 - #8 x 25mm screws 17 Using pilot hole as guides, screw into second cabinet.
Adjusting The Door Hinges Using a Philips screwdriver, the doors can be adjusted: Left, right, forwards and backwards. 18 To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise. A 19 To adjust the gap between the doors and frame, turn the screw (B) clockwise or counterclockwise. B Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions. Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
HOME BAR SERIES SPLIT CABINET Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops 220 lbs. 55 lbs. 48” Countertop. Fits over 2 Cabinets 25 72” Countertop. Fits over 3 Cabinets lbs. 200 lbs. Split Base Cabinet Max 500 lbs. 96” Countertop.
Unpacking • Begin by placing the package on a covered flat surface. • Remove all cardboard, foam packaging material and clear plastic bags. • Dispose / recycle all packaging materials. • Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing Drawer Handle 1 1x Handle 3 2 Parts Needed. Screw in bolts. 2x Drawer Handle Bolt M4 x 30mm Note: Cabinets come with handles installed on inside of drawers/ doors. Align handle to holes on doors or drawers.
Installing the Handles 4 2 x Handles 6 5 Parts Needed. Screw in bolts. 4 x Door Handle Bolt M4 x 22mm Align handle to holes on doors or drawers.
Inserting Shelf 1 Open cabinet doors. Attach shelf clips to desired height. 2 Ensure clips are at level height. 3 Insert shelf at a slight angle. 4 Position over shelf supports . Lower shelf down onto shelf supports.
Removing Drawer 7 Extend drawer fully. 9 Tilt and remove shelf rack. 8 Press plastic triggers on underside of drawer according to arrows in image. Inserting Drawer 10 3 Partially extend drawer slides. 11 Put drawer on slides and slide each drawer slide forward until you hear a click sound.
Fastening Cabinets 12 Parts Needed. 13 Note: All shelves and drawers must be removed prior to fastening cabinets together. Drill 3/32 pilot holes on interior wall of cabinet being fastened. 4 - #8 x 25mm screws pilot hole as guides, screw into second cabinet.
Mounting the Worktop 15 Place worktop over cabinets and lower onto cabinets. 4 - #8 x 25mm screws 16 Drill 4, 3/32” pilot holes on interior roof of cabinet. 17 3 Tighten screws to secure cabinets.
Adjusting The Door Hinges Using a Philips screwdriver, the doors can be adjusted: Left, right, forwards and backwards. 18 To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise. A 19 To adjust the gap between the doors and frame, turn the screw (B) clockwise or counterclockwise. B Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions. Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
HOME BAR SERIES TALL DISLAY Warning: Excessive weight hazard! Use two or more people to move, assemble or install wine cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops (for Base cabinets only.) 50lbs. 25lbs. 48” Countertop. Fits over 2 Cabinets 25lbs. 72” Countertop. Fits over 3 Cabinets 25 lbs. 50 lbs. Tall Display Cabinet Max 175 lbs. 96” Countertop.
Unpacking • • • • • Begin by placing the package on a covered flat surface. Remove all cardboard, foam packaging material and clear plastic bags. Dispose / recycle all packaging materials. Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing the Handles 1 3 Screw in bolts. Cabinets come with handles installed on inside of drawers/doors. 2 Parts Needed. 2 x Handle Note: 2 x Handle Bolt M4 x 22mm Align handle to holes on doors or drawers.
Inserting Glass Shelves 1 Open cabinet doors. Attach shelf clips to desired height. 2 Ensure clips are at level height. 3 Insert glass shelf at a slight angle. 4 Position over shelf supports . 5 Lower shelf down onto shelf supports. 6 Repeat steps 1-4 for all shelves.
Mounting Cabinets 7 Use stud finder to locate the studs and mark the wall with a pencil. 8 Gather parts. 4 x Lag Screw 4 x Threaded Washer 6mm x 55mm 9 4 x Threaded Caps Near the top of the cabinet, drill 1/4” holes through the back of the cabinet that are in line with marked studs. Repeat for drilling two holes near the bottom of the cabinet. Pilot Holes Place cabinet flush against wall and attach using screws and washers. Wall Studs Wall Studs 10 11 Use threaded caps to cover screws.
Fastening Cabinets 12 Parts Needed. 13 Note: All shelves must be removed prior to fastening cabinets together. Drill 3/32” pilot holes on interior wall of cabinet being fastened. 4 - #8 x25mm screws 14 Using pilot hole as guides, screw into second cabinet.
Adjusting The Door Hinges Using a Philips screwdriver, the doors can be adjusted: Left, right, forwards and backwards. 15 To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise. A 16 To adjust the gap between the doors and frame, turn the screw (B) clockwise or counterclockwise. B Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions. Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
HOME BAR SERIES WALL WINE RACK Warning: Excessive weight hazard! Use two or more people to move, assemble or install cabinets to avoid back injury. Do not leave children unattended near cabinets. High risk of tipping if cabinets are installed incorrectly: securely attach cabinets to the wall to avoid serious injury. For assistance, call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Weight Capacity Countertops (for Base cabinets only.) 50lbs. 50lbs. 48” Countertop. Fits over 2 Cabinets 72” Countertop. Fits over 3 Cabinet 50 lbs. 96” Countertop. Covers over 4 Cabinet Wall Wine Rack Max 150 lbs.
Unpacking • Begin by placing the package on a covered flat surface. • Remove all cardboard, foam packaging material and clear plastic bags. • Dispose / recycle all packaging materials. • Verify all the contents in the box and gather the required tools. See “Parts” and “Tools Needed” in the list below.
Installing the Handles 1 3 Cabinets come with handles installed on inside of drawers/doors. 2 Parts Needed. 2 x Handle Note: 4 x Handle Bolt M4 x 22mm Screw in M4 x 22mm bolts. Align handle to holes on doors or drawers.
Mounting Cabinets 7 Use stud finder to locate the studs and mark the wall with a pencil. 8 Gather parts. 4 x Lag Screw 4 x Threaded Washer 6mm x 55mm 9 4 x Threaded Caps Near the top of the cabinet, drill 1/4” holes through the back of the cabinet that are in line with marked studs. Repeat for drilling two holes near the bottom of the cabinet. Pilot Holes Place cabinet flush against wall and attach using screws and washers. Wall Studs Wall Studs 10 11 Use threaded caps to cover screws.
Fastening Cabinets 4 Parts Needed. 5 Note: Remove wine rack to make attaching cabinets easier. Drill 3/32” pilot holes on interior wall of cabinet being fastened. 4 - #8 x 25mm screws 6 Using pilot hole as guides, screw into second cabinet.
Adjusting The Door Hinges Using a Philips screwdriver, the doors can be adjusted: Left, right, forwards and backwards. 12 To adjust the doors left or right, turn the screw (A) clockwise or counterclockwise. A 13 To adjust the gap between the doors and frame, turn the screw (B) clockwise or counterclockwise. B Thank you for purchasing a NewAge Product! Please give us a call or visit online if you have any questions. Call 1.877.306.8930; for UK 0800.031.4069; e-mail at info@newageproducts.
Manufacturer One Year Limited Warranty When this product is installed, operated and maintained according to the instructions attached to or furnished with the product, NewAge Products Inc. will replace the defective product or parts if the part fails as a result of defective materials or workmanship for a period of One Year from the purchase date of the product. NEWAGE PRODUCTS INC. WILL NOT PAY FOR: 1.
