How to Guide
9
Wall Mounted Shelf Installation Overview
Install the Pad Eye Plate and Side Beams
with Cable Assemblies. (Page 15-19)
Install wall brackets & back perimeter
beams onto the wall at a determined
height. (Page 13-14)
Determine your preferred conguration
before beginning assembly. (Page 10)
Plan your Wall Mounted Shelf
installation location, determine
orientation and verify spacing of studs.
(Page 11-12)
• Wall brackets must be fully
secured to studs using 1 lag bolt
each or to concrete wall using 1
concrete anchor.
• Read through the entire
instruction manual rst before
beginning installation.
Install the front perimeter beams and
angled cross supports. (Page 20-21)
Place the grid supports followed by the
steel grids to complete the Wall Mounted
Shelf installation. (Page 21-22)
1
2
3
5
6
4
Note:
If installing the Wall Mounted Shelf cables to the wall, start on page 11. If installing the Wall Mounted Shelf
cables to the ceiling, start on page 12.