ASSEMBLY GUIDE Wildwood Arbor VA68896 VER 1.
GETTING STARTED First off, allow us to say thank you for the investment you have made in our fine Arbor. This Arbor is designed to be assembled and installed ideally by two people with basic carpentry knowledge and tools. Do not attempt alone, especially during the installation stage. When assembling components, place on a non-abrasive surface (ie: shipping box) to avoid scratching. We recommend a 15’ x 15’ area for unobstructed assembling.
IN THIS GUIDE MATERIALS OVERVIEW 4 MATERIALS BREAKDOWN 5 ADDITIONAL MATERIALS LIST 6 DISTANCE BETWEEN WOOD POSTS 7 INSTALLING WOOD SUPPORTING POSTS INTO GROUND 8 GUIDE POST OPENING ONTO MOUNTING POST 9 ATTACHING CARRY BEAMS TO POSTS 10 ATTACHING BEAM ENDS TO BEAMS 11 ATTACHING FULLY ASSEMBLED BEAMS TO POSTS 12 ATTACHING FILTERS TO BEAMS 13 WWW.NEWENGLANDARBORS.COM WWW.NEWENGLANDARBORS.CO.
MATERIALS OVERVIEW 1 2 3 4 5 1. 12016 - Filters (x7) 1 1/2” x 1 1/2” x 30” (3.81cm x 3.81cm x 76.2cm) 2. 12017 - Beam End Left (x2) 1 1/2” x 6” x 19” (3.81cm x 15.24cm x 48.26cm) 3. 12021 - Beam End Right (x2) 1 1/2” x 6” x 19” (3.81cm x 15.24cm x 48.26cm) 4. 12018 - Carrying Beam (x4) 1 1/2” x 6” x 30” (3.81cm x 15.24cm x 76.2cm) 5. 12020 - Beam (x2) 1 1/2” x 6” x 70” (3.81cm x 15.24cm x177.8cm) 6. 12019 - Post (x2) 6” x 6”x 84 1/2” (15.24cm x 15.24cm x 214.63cm) 6 24” 60.
MATERIALS BREAK DOWN 1 3 2 12016 - FILTER (X7) 12017 - BEAM END LEFT (X2) 12021 - BEAM ENDS RIGHT (X2) 5 4 12018 - CARRYING BEAM (X4) 7 12020 - BEAM (X2) 6 8 STAIN SLEEVE SOCKET (X1) 9 WRENCH (X1) 12019 - POST (X2) VER 1.
ADDITIONAL MATERIALS LIST X8 X16 X8 20054- BOLT, HEX NUT AND WASHER 9” (24CM) X16 X32 X16 20060 - 2” (5CM) 20048- 2 1/2” (6CM) - X22 ADDITIONAL MATERIALS TO PURCHASE 1 4x4x10’ (8.9x8.9x304.80cm) Pressure Treated Wood for Posts. Cut down in half, making two 5’ posts. Purchase at local building centre. QUANTITY: x1 2 Concrete Ready Mix. Purchase at your local building centre. QUANTITY: x1 3 x2 Wood Stakes and x1 small roll of String. Purchase at your local building centre 6 VER 1.
Step 1 DISTANCE BETWEEN WOOD POSTS Determine the area you want to start building your arbor. At one end of the desired area, hammer one wooden stake into the ground, tie a piece of string around it and measure to a length of 62 5/8” (159cm). This is where your second wood stake needs to be hammered into the ground. You have now set up your wood stakes and ready to excavate your holes 66” (167.64 cm) inside post to inside post 66” (167.64cm) String Wood Stakes VER 1.
Step 2 INSTALLING WOOD SUPPORTING POSTS INTO GROUND Post location and placement is the most critical step in the overall installation process. Please double check for the possibility of any underground utilities such as sprinkler, gas or telephone lines. Make sure that your wood posts are straight using a level. 2 1 3 24” (61CM) 3” 36” (91CM) With your wood stakes in position aligned by the string and you have determined the location of where you want your posts to be, excavate 10” (25.
Step 3 GUIDE POST OPENING ONTO MOUNTING POST GROUND VER 1.
Step 4 ATTACHING CARRY BEAMS TO POSTS 9” (24CM) - X8 + 10 + VER 1.
Step 5 ATTACHING BEAM ENDS TO BEAMS 1 1/2” (5CM) - X16 + + Repeat for second beam once completed. VER 1.
Step 6 ATTACHING FULLY ASSEMBLED BEAMS TO POSTS 2 3/8” (6CM) - X8 12 VER 1.
Step 7 ATTACHING FILTERS TO BEAMS 2 3/8” (6CM) - X14 VER 1.
We’re here for you. If you have any questions at all, don’t hesitate to contact us. NORTH AMERICA TOLL FREE 1-800-282-9346 UNITED KINGDOM (44) 2038 687160 Visit our website to chat with a support technician. WWW.NEWENGLANDARBORS.COM WWW.NEWENGLANDARBORS.CO.UK 14 VER 1.