Instructions / Assembly

Check Box for These Contents

In the event of missing or defective parts please call our customer service

dept. at

1 800 282 9346, ext #20

(Mon. to Fri. 8:00 AM to 4:00 PM EST).

Planter Bed Walls

(8)

Stainless Steel Screws

(12)

3. Washers (4)

Tools You Will Need

• Cordless Screwdriver

General Information

• Read Instructions through carefully before beginning assembly.

• When assembling components, place on a non-abrasive surface

(i.e. shipping box) to avoid scratching.

• We recommend an area approx 5’x 8’ for unobstructed assembling.

• You should not need to use excessive force when assembling component.

The Huntington Raised Planter Bed

Please read through before starting assembly.

ASSEMBLY INSTRUCTIONS

www.edenarbors.com

Not to Scale

Ver 1/NOV 2011

PAGE 1
A S S E M B LY I N S T R U C T I O N S The Huntington Raised Planter Bed www.edenarbors.com Please read through before starting assembly. Check Box for These Contents In the event of missing or defective parts please call our customer service dept. at 1 800 282 9346, ext #20 (Mon. to Fri. 8:00 AM to 4:00 PM EST). 1. Planter Bed Walls (8) 2. Stainless Steel Screws (12) 3.
PAGE 2
1 STEP ONE NOTE: The end caps are pre-glued. In the event that any of the end caps come off, simply use PVC or plumbing glue to re-attach them to the wall. 1 Layout the bottom four walls of the planter bed into place as shown aside. Walls will simply interlock into place. 2 Using the screws (4) provided, fasten the walls of planter bed at all four corners as shown. 3 2 Layout and align two walls opposite to each other as shown and fasten with two screws with washers through the rib of the wall.