Installation Guide

2
www.edenarbors.com
1
Layout the bottom four walls of the planter bed into place
as shown aside. Walls will simply interlock into place.
Using the screws (4) provided, fasten the walls of planter
bed at all four corners as shown.
Layout and align two walls opposite to each other as shown
and fasten with two screws with washers through the rib of
the wall.
Place the last two walls into place as shown.
Fasten the last two wall into place using the (4) screws
provided.
1
2
3
4
STEP ONE
2
3
4
5
NOTE: The end caps are pre-glued. In the event that any of
the end caps come off, simply use PVC or plumbing glue to
re-attach them to the wall.
5
1915 Dove St., Port Huron MI USA 48060
Toll Free Phone: [phone] Toll Free Fax: [phone]