Specifications

135
Floor Stands, Booms and Shock Mount
Shock Mount Z 26 mt
The Z 26 rubber shock mount is inserted
between the stand and the swivel mount
to avoid the transmission of structure-
borne noise. It has a 1/2" threaded stud
and a 5/8"-27 female thread to attach to
tripods. Included is a thread adapter for
1/2" and 3/8" studs.
Z 26 mt ................ blk ........ Cat. No. 006207
Stand Extensions STV 4/20/40/60
The STV... stand extensions are screwed
between microphone stands (for exam-
ple MF 4, MF 5) and swivel mounts (for
example SG 21/17 mt).
Length 40, 200, 400 or 600 mm.
Ø 19 mm.
STV 4 .................... blk ........ Cat. No. 006190
STV 20 ................. blk ........ Cat. No. 006187
STV 40 ................. blk ........ Cat. No. 006188
STV 60 ................. blk ........ Cat. No. 006189
Goosenecks
Gooseneck SMK 8 i
The SMK 8 i gooseneck is 360 mm long
and serves as electrical and mechanical
connection of a microphone with XLR 3
connector. A counter nut secures the
microphone against rattle and – to a cer-
tain extent – against theft. The cable
comes out at the side, just above the
bottom thread. Cable length 4.5 m, ca-
ble connector XLR 3 M. The gooseneck
has a 5/8"-27 female thread, plus a
thread adapter to connect to 1/2" and
3/8" stands.
SMK 8 i ................ blk ........ Cat. No. 006181
Gooseneck SMK 100 KA
The SMK 100 KA for the KM 100 system
is used to assemble particularly small
table microphones, for example on an
MF 2 table stand. The gooseneck is only
8 mm in diameter. It has a 5/8"-27 fe-
male thread, plus a thread adapter to
connect to 1/2" and 3/8" stands. The
cable is incorporated in the gooseneck
and emerges at the rear. It terminates
with a ring contact adapter fitting onto
the KM 100 (F) output stages. Goose-
neck length 160 mm. Cable length 2.5 m.
SMK 100 KA ........ blk ........ Cat. No. 008413
Double Gooseneck SMK 100-2 KA
Gosseneck for directly mounting two
active capsules of the KM 100 system,
making a particularly small table micro-
phone. Both goosenecks are only 8 mm
in diameter. The bottom has a 5/8"-27
female thread, plus a thread adapter to
connect to 1/2" and 3/8" stands. The
cables incorporated in the goosenecks
emerge at the rear. They terminate with a
ring contact adapter fitting onto the
KM 100 (F) output stages. Gooseneck
length 160 mm. Cable length 2.5 m.
SMK 100-2 KA ..... blk ........ Cat. No. 008414