User Manual

3. Select an encryption type and fill in the corresponding wireless network information:

Items Information

Authentication

Type

There are 7 types of authentication modes supported by Utility

including

open, Shared, LEAP, WPA and WPA-PSK, WPA2 and WPA2-PSK.

Encryption Type

For open and shared authentication mode, the selection of encryption

type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-

PSK

authentication mode, the encryption type supports both TKIP and AES.

802.1x Use 802.1x to make WPA and WPA2 certification. This function

only

works when connecting to a WPA and WPA2 supported device.

WPA Pre-

shared

Key

This is the shared secret between AP and STA. For WPA-

PSK and

WPA2-

PSK authentication mode, this field must be filled with character

longer than 8 and less than 32 lengths.

WEP Key

Only valid when using WEP encryption algorithm. The key must match

AP's key.

4. Specify the 802.1x information if you are using the 802.1X certification method.

Users that do not use this function or connecting to an open-wireless network please skip this

part.