User's Manual

Table Of Contents
WPA-PSK [TKIP] + WPA2-PSK [AES]. This type pf security allows clients to use
either WPA-Personal [TKIP] or WPA2-Personal [AES].
WPA3-Personal. This type of security enables WiFi devices that support WPA3
to join the router's WiFi network. WPA3 is the latest security standard and is more
secure than WPA2.
7. Click the Apply button.
Your settings are saved.
Set up the router as a WiFi access point
You can set up the router to run as an access point (AP) on the same local network as
another router.
To set up the router as an AP:
1.
Use an Ethernet cable to connect the Internet port of this router to an Ethernet port
on the other router.
2.
Launch a web browser from a computer or mobile device that is connected to your
mesh network.
3.
Enter http://www.routerlogin.net.
A login window opens.
4. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Wireless AP.
The Wireless AP page displays.
6. Select the Enable AP Mode check box.
The page adjusts.
7. Select an IP address setting:
Get dynamically from existing router. The other router on the network assigns
an IP address to this router while it is in AP mode.
Use fixed IP settings on this device (not recommended). Use this setting if you
want to manually assign a specific IP address to this router while it is in AP mode.
Using this option effectively requires advanced network experience.
User Manual67Manage Network Settings
Nighthawk Mesh WiFi 6 System