User's Manual

CAUTION: To ensure water resistance of the Tag, the seal must not be stuck between the Tag’s main
part and the batteries’ cover.
No data?
Reason 1: Radio signal is too weak
If the Tag is located too far away from your Welcome camera, or separated by solid obstacles such as
concrete walls, the Tag might not be able to transmit data correctly. In that case, make sure to bring
the Welcome closer to the place you wish to monitor with a Tag.
Reason 2: Batteries are low
Check the Tag’s batteries. When inserting batteries, the Tag should flash green. If you are unsure
whether your batteries still work, replace them.
Where do I place my Tag?
Tag can be placed on any moving (any types of door, window …).
Use the provided adhesives.
Do not place it before having setting it up.
Be careful to let the screws accessible for later batteries replacement.