Datasheet

2
TruePower™ PoE loaded test for up to 90W
LinkRunner G2 is the first field tester able to validate loaded PoE
performance by drawing actual power up to 802.3bt 90W across all four
pairs. The device loads the circuit to stress switches, cabling, and patch
panels, all while measuring the voltage and pairs being used. LinkRunner
G2 uses the TruePower™ test to validate the power delivery before installing
IoT connected devices to ensure a smooth deployment.
Get Answers Fast with AutoTest
The LinkRunner G2 Li-ION battery can be charged via PoE and can power up in just seconds
from its standby mode. The enhanced AutoTest performs a set of complex connectivity tests in
seconds. LinkRunner G2 quickly and accurately validates various network health variables:
• PoE loaded test up to 90W
• Link speed and duplex (actual and advertised)
• RX pair, polarity, and signal level
• 802.1x authentication
• Discover the nearest switch/slot/port and Data/Voice VLAN
• List all VLANs seen from the switch port
•
DHCP discovery with vendor classification ID and shows Option 60 and 150 response,
commonly used in VoIP and Wi-Fi deployment, and show subnet and DHCP server addresses
• Gateway and DNS server availability and responsiveness
• Ping or TCP port connectivity tests to an unlimited number of user-defined targets
Packet Reflector
The LinkRunner G2 features a packet reflector mode that allows the device to be used as a
remote endpoint during end-to-end network path performance tests to validate LAN and WAN
throughput capabilities up to 1Gbps. LinkRunner G2 supports packet reflection for:
• OptiView® XG Network Analysis Tablet
• OneTouch™ AT Network Assistant
AutoTest with VLAN
netally.com/products/linkrunnerg2
PoE Test PoE Class Setting
Packet Reflector Mode