Operation Manual

The installation of a smoke/CO alarm should
be made by a qualified technician, and all
wiring used to install this alarm should be
made in accordance with the British National
Electrical Code, the British Standard BS 7671,
with appropriate national electrical installation
regulations and/or applicable codes in your
local jurisdiction. Permanent connection to the
fixed wiring of the building should be made in a
suitable junction box.
For a complete set of instructions and
warnings, refer to page 22.
Tip: Lay everything out on a table for easy installation.
1. Wake it up
Remove the dust cover and pull out the battery
tab to wake up Nest Protect.
2. Press the Nest button
Nest Protect will glow blue when it’s awake.
3. Get the Nest Mobile app
You’ll use the Nest Mobile app to get
Nest Protect connected to Wi-Fi, and to
additional Nest Protects in the home.
SETUP AND INSTALLATION
(Professional installation recommended)
8